GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: james2 on 15 October 2011, 17:38

Title: New turborev smic fitted
Post by: james2 on 15 October 2011, 17:38
It fitted well ,apart from oil in the old intercooler again.  :cry: i might get a catch can. The oil that came out filled a paint roller tray, you know the big ones you put paint in one side well it filled the bit were the paint goes  :shocked: They should put sump plugs on intercoolers.  :laugh:
Title: Re: New turborev smic fitted
Post by: GJSEB79 on 15 October 2011, 19:02
was this on a tdi james or petrol mate and did the bumper go on right an was there any modifycation needed for it to fit mate
Title: Re: New turborev smic fitted
Post by: james2 on 15 October 2011, 19:19
1.8 petrol.No mods needed but i was pissed off my old intercooler never had the 10mm plug to block the hole in new one ,it didnt even have one on the old one.I made a alloy plate and gasket with black silcon and bolted it over the hole.Seem to hold the boost, touch wood.  :wink: Bumper was easy to remove and refit with 2 people.  :wink:
Title: Re: New turborev smic fitted
Post by: GJSEB79 on 15 October 2011, 19:39
so your old doesnt have the sensor in it then as i am going to be putting this on a tdi but i bleive mine has got the sensor did you get any fault codes turn up on the dash or not also do you feel any diffrence with it mate
Title: Re: New turborev smic fitted
Post by: james2 on 15 October 2011, 20:32
i think yours will have sensor, no i have no fault codes but my ignition amplifier is playing up .Iv ordered a new one ,picking up monday.So cant try it as its like running on 3 cylinders, but it was fine again today.But i took it easy incase it plays up again. :undecided:
Title: Re: New turborev smic fitted
Post by: GJSEB79 on 15 October 2011, 20:57
did you have get any new pipes or did the old ones fit with just new clips mate, also james i dont suppose you no if a diesel has this amplifer do they cheers gordon :huh:
Title: Re: New turborev smic fitted
Post by: james2 on 15 October 2011, 21:10
it fitted straight on ,i didnt use anything else.Your car if its diesel wont have a ignition amplifier as it dont have spark plugs. :wink:

pic: http://www.use.com/a4e7c553ce2c98a1297e?p=3#photo=3 (http://www.use.com/a4e7c553ce2c98a1297e?p=3#photo=3)
Title: Re: New turborev smic fitted
Post by: GJSEB79 on 15 October 2011, 21:17
oh yeh  :grin: right just waiting for mine to turn up going take loads of photos i just hope my fitting goes as well as yours did was they alot of oil did you have to take the light out to get to the top clip on intercooler
Title: Re: New turborev smic fitted
Post by: james2 on 15 October 2011, 21:22
no left light in ,but took the cover off the back of it. :wink: mine a intercooler/oil cooler :grin:
Title: Re: New turborev smic fitted
Post by: GJSEB79 on 15 October 2011, 21:25
right spot on these little tips will hopefully help me out when i fit mine where abouts you located james just in case i get stuck ha ha  :laugh:
Title: Re: New turborev smic fitted
Post by: james2 on 15 October 2011, 21:26
banstead ,surrey                      sm7  postcode area  :wink:
Title: Re: New turborev smic fitted
Post by: james2 on 15 October 2011, 21:27
by the mad mile.  :grin: :evil:
Title: Re: New turborev smic fitted
Post by: james2 on 15 October 2011, 21:37
if you ever need a hand i have every tool + garage kitted out . :smiley: + the mad mile test run stripe  :lipsrsealed:
Title: Re: New turborev smic fitted
Post by: GJSEB79 on 15 October 2011, 21:44
nice one pal just wait for it to turn up an see how i go with it  :undecided:
Title: Re: New turborev smic fitted
Post by: james2 on 15 October 2011, 21:54
k, get someone to help put bumper back on as there clips each side it has to slide onto.Plus compare intercooler to yours , might need adjustment it says on there site for deisels + pipes ,but why do you need extra pipes?  :grin:
Title: Re: New turborev smic fitted
Post by: Adam on 16 October 2011, 10:02
k, get someone to help put bumper back on as there clips each side it has to slide onto.Plus compare intercooler to yours , might need adjustment it says on there site for deisels + pipes ,but why do you need extra pipes?  :grin:

Have a look at my old mk4, TDI with the turborevs side mount - http://www.golfgtiforum.co.uk/index.php?topic=127037.msg1611433#msg1611433
Title: Re: New turborev smic fitted
Post by: GJSEB79 on 16 October 2011, 13:14
adam did you have to get new top pipes aswell that come of the top of the intercooler an whre abouts do you get this bayonet fitting from then mate also do you have to do this as the pipes are diffrent bores from the old intercooler to the new smic pal :huh: