GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: ian007miles on 14 October 2011, 12:07

Title: Can any one help me With fault code
Post by: ian007miles on 14 October 2011, 12:07

Right I just done a fault scan and this fault number came up 18010. It says in the book power suply(b+) terminal 30-low voltage does any one no wot this means

Title: Re: Can any one help me With fault code
Post by: Dan_GTi8v on 14 October 2011, 15:25

Quote from: rosstech wiki

8010/P1602/005634 - Power Supply B+ Terminal 30: Voltage too Low

Possible Causes
Cables on the Battery were removed
Battery weak (voltage)
Generator Disfunction

Possible Solutions
Check Battery Cables
Check/Replace Battery
Check/Replace Generator

Special Notes
If multiple Control Module have Power Supply Faults stored, it's most likely to be one common Problem like the ones shown above. Otherwise when only one or two Control Modules have such Codes stored you better start searching at the individual Power Supply of these Modules.
Terminal 30 means unswitched battery power that is supplied even when the ignition is off. This is not referring to any physical terminal numbered 30.

Title: Re: Can any one help me With fault code
Post by: ian007miles on 14 October 2011, 15:33

Could it be that I took the battery off yesterday ??

Title: Re: Can any one help me With fault code
Post by: Wazzzer on 14 October 2011, 17:26

yep for defo

Title: Re: Can any one help me With fault code
Post by: jamie16v on 14 October 2011, 18:31

Quote from: Wazzzer on 14 October 2011, 17:26

yep for defo

+1,
just clear the code and forget!

Title: Re: Can any one help me With fault code
Post by: ian007miles on 14 October 2011, 21:51

Ok thanx for the replys