GolfGTIforum.co.uk

General => The garage => Topic started by: Simpson on 09 October 2011, 20:55

Title: Toads AI606 alarm boot solenoid woes
Post by: Simpson on 09 October 2011, 20:55

as above the golf i recently purchased only has one fob it has the 4 buttons two green and two black and slightly smaller im assuming its this make alarm. I guess i need to find the main control box inside the car to get a code to order a new fob?

 also i need to get the boot to lock on the fob too there is no solenoid there at present which one do i need? do i need to get one from toad themseñves? and can i just splice off the twos wires from the passenger door to get power?  thanks  :smiley:

Title: Re: Toads AI606 alarm boot solenoid woes
Post by: tshirt2k on 09 October 2011, 21:48

You need a solenoid and a relay to operate it from the alarm. But you wont be able to do anything unless you have the code to program your alarm.

Title: Re: Toads AI606 alarm boot solenoid woes
Post by: Simpson on 10 October 2011, 00:19

can i find the code on the alarm box? cheers

Title: Re: Toads AI606 alarm boot solenoid woes
Post by: tshirt2k on 10 October 2011, 11:58

No. It should be supplied with the paperwork.