GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: james2 on 05 October 2011, 21:38
-
As above ,want too fit my new intercooler? :undecided:
-
take grill off then theres 3 or 4 bolts across top of bumper to undo then in each side where the lower grill bits are pop them off and theres a bolt in each side also check wheel arch for bolts and slide off
-
or if ya get stuck theres loads on youtube :wink:
http://www.youtube.com/watch?v=qfoVOpRsNvo
-
(http://i4.photobucket.com/albums/y146/Imagewerx/bumper1.jpg)
-
Thanks ,man there loads of bolts. :grin:
-
The above guide is the one I used when I first did it! I just left the grill intact hanging on the securing pin, bumper slides on around it. But as your wanting to install a FMIC you may need it off!
-
Thanks ,man there loads of bolts. :grin:
MK4 has HALF the bolts my Audi has :lipsrsealed:
-
Thanks ,man there loads of bolts. :grin:
MK4 has HALF the bolts my Audi has :lipsrsealed:
Really :shocked:
-
What the lever clip off and throw away? :undecided:
-
Taking off the front bumper is easy, it was the first thing i had to do when i bought the car as i had to change a bulb.
-
Thanks ,man there loads of bolts. :grin:
MK4 has HALF the unnecessary bolts my Audi has :lipsrsealed:
What the lever clip off and throw away? :undecided:
yes, always remove and throw away unnecessary parts, they are junk and only part of whats called build quality. totally unecessary and only makes the car a boat. though if it were a real boat it would most certainly sink.