GolfGTIforum.co.uk

General => The garage => Topic started by: jamie16v on 05 October 2011, 12:44

Title: cosworth injectors in an AGU?
Post by: jamie16v on 05 October 2011, 12:44
ok, had my eyes set on some C20LET injectors but someone snapped them up before the money fairy came.. :cry: so spotted some cossie yellows which are also ev6 and was wondering if they would be suitable for a hybrid k03 setup on a vr6 2.75" maf?
Title: Re: cosworth injectors in an AGU?
Post by: Wazzzer on 05 October 2011, 19:03
no mate totally wrong impedance
Title: Re: cosworth injectors in an AGU?
Post by: jamie16v on 06 October 2011, 10:50
what do we need? 16ohms?.
Title: Re: cosworth injectors in an AGU?
Post by: Wazzzer on 06 October 2011, 11:57
Once I get home I'll find the link for the injector chart table that tells you pretty much all of the info on every Bosch injector. I think you can go slightly above/below with the impedance but not massively different. The Saab reds have the same impedance as the standard AGU injectors but the C20LET yellows are a bit lower. They still work though and the reds have been fitted to Vauxhalls for years