GolfGTIforum.co.uk
Model specific boards => Golf mk1 => Topic started by: truff on 25 April 2005, 14:53
-
may be a no-brainer but when putting an injection engine to a carbed mk1 would i only need the engine loom or the whole car loom its just looms are a b!tch to fit for me and ild prefer carbs (twin webbers) but these are pricey a what to do on as little cash as poss. also does an audi two litre fit in with the satndard mounts and manifolds cheers
-
You're going to need more than just the egine bay loom. For a start you have the electric fuel pump at the back there, carb has a mechanical pump. Then there is the fuel pump relay, so you'll need that relay and associated wiring. Best way to tackle this project would be with a donor vehicle. Failing that, stick with the webers.
-
cheers for the help