GolfGTIforum.co.uk
Model specific boards => Golf mk6 => Topic started by: GTI:Gibbo on 30 September 2011, 09:14
-
Hey just thought I'd add my picture into the mix:
pre coil-overs:
(https://lh3.googleusercontent.com/-75v8fC-oZoo/ToNIZ2Q0RDI/AAAAAAAAACQ/sg5YnzTaIxk/s800/DSC00160.JPG)
post coil-overs:
(https://lh5.googleusercontent.com/-B6hRkC1PTIs/ToSrbT7z_JI/AAAAAAAAACg/XJFp8Hb0sqQ/s800/DSC00162.JPG)
Very nice..... :cool: what drop are you Rodin on?
-
Very nice..... :cool: what drop are you Rodin on?
I'm sitting about 24 3/4 in. (62.8 cm) fender to ground in the front, and 24 7/8 in (63.1 cm) fender to ground in the read. They still need to settle and will probably drop a tad lower but as of right now there is very minimal wheel gap and they are not tucked.
-
Very nice..... :cool: what drop are you Rodin on?
I'm sitting about 24 3/4 in. (62.8 cm) fender to ground in the front, and 24 7/8 in (63.1 cm) fender to ground in the read. They still need to settle and will probably drop a tad lower but as of right now there is very minimal wheel gap and they are not tucked.
Looks ace.. What coils are they?
-
hatchfanatic06 just to let you know that your build thread in your signature is mis-configured.
Lovely car.
-
Moved from the photo sticky thread.
Watch out for speed bumps :wink:
Looks quite odd when it is lowered, IMO.
Could it be used as a snow plough in the winter?
-
Thanks everyone,
I'm sure if you wanted to it could be used a snow plow =P.
As far as the coils: http://www.namotorsports.net/Koni/Suspension/Coilovers/Part-Number=KO1150-5080
ride is slightly stiffer then stock, other then that i feel a huge difference in the corners. And thanks for the heads up on the link, fixed it.
:cool: