GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: gasketface on 02 September 2011, 15:02
-
My roof aerial seal is non existent so i took a look on Ebay and found this :-
http://www.ebay.co.uk/itm/VW-Golf-Mk3-Mk4-Mk-3-4-Roof-Aerial-Antenna-Gasket-Seal-/400234460445?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5d2fd5351d
In case this link expires the seller is :- http://myworld.ebay.co.uk/car-masts-uk/?_trksid=p4340.l2559
Being a tight**s i thought i'd get one from my local dealer only to find that it's not available as a separate part.Not sure the parts guy really tried so does anyone know if this is available as a single part ?.
-
Being a tight**s i thought i'd get one from my local dealer only to find that it's not available as a separate part.Not sure the parts guy really tried so does anyone know if this is available as a single part ?.
That is correct, it is not available without the base from VW, I made my own out a piece of old inner tube.
-
Yes I spent ages looking for one of these seals as the genuine part from VW is not available so I had to buy the complete aerial base for about £24.00 I wish I had waited now and bought the seal off this ebay seller. :cry:
-
whats wrong with the ebay one? I bought one and its perfect
-
As above, the fleabay one is fine.
-
I will buy one now.I just hate waiting for things when i can order them from up the road and get them next day. :grin:
-
The ebay ad says it can normally be fiited from the outside without the need to remove the head lining. Is this true in peoples experience?
-
NO!
You will need to take the aerial off, and disconnect the cable to slip the new seal in.
-
ah. So the headliner and interior trim needs to be removed to get at it. That sounds like a real pain.
-
Just remove the trim running along the top of the boot. You should be able to get in there without bending your headlining too much, and you just need to pull the co-axial connector apart, then undo the securing bolt. Nice and easy! :smiley:
-
Nice one cheers! :grin:
-
I replaced mine by sliding my hand between the headlinere and roof. You hust need to undo a nut on the inside to remove the areal base then you can fit the seal. it is a 10 min job.
-
Seriously, its a doddle.
-
Seriously, its a doddle.
piece of cake.