GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: readiegti on 02 August 2011, 18:37
-
hi ive just brought a new rear bumper for my mk 3 gti colour concept and i need to no how to change any help would be handy
-
remove old one :grin:
fit new one :laugh:
and hello and welcome,
have a look in the MK3 section and sub sections, and have a search too, sure its been covered
if not post up down in that section, more liable to a helpful reply :wink:
-
Remove bolts from top edge, their is 3 or 4 along the straight edge once the boot is open, also a couple under each side looking up from under car and maybe one in the middel (cant remember). it then all slides off
takes about 10 mins to remove
-
EASY TO DO AS KELL'S SAY WON'T TAKE YOU MORE THAN TEN MIN'S. :cool:
-
Every man should have a Haynes manual or equivalent. If you haven't got one, get one!..
Oh and welcome also.
-
yeah easy job. open boot and there are 4 bolts behind some little plastic covers pop them off. and then underneath there are 3 bolts whip them off and give it a tug and off she comes.
-
Very easy 15mins and it should be off the car, front is just as easy as well.