GolfGTIforum.co.uk

General => Car audio => Topic started by: greenday95 on 01 August 2011, 12:46

Title: CO AXIAL PARCEL SHELF SPEAKERS
Post by: greenday95 on 01 August 2011, 12:46

Can i connect them directly to existing standard speaker wiring?

if so, HELP!!!!!!!!!!!!!!!!!!!!!

thanks

Title: Re: CO AXIAL PARCEL SHELF SPEAKERS
Post by: dragonfly on 01 August 2011, 13:04

Assuming you are talking about using these speakers as a) you don't have any exisitng and b) the wiring is there - then yes you can connect them.

Title: Re: CO AXIAL PARCEL SHELF SPEAKERS
Post by: greenday95 on 01 August 2011, 13:20

i have an x reg mk4 gti. want to put them into the parcel shelf.

could someone give me an idea how o do it as th reardoor speaker connection are different

Title: Re: CO AXIAL PARCEL SHELF SPEAKERS
Post by: _Adam_ on 01 August 2011, 13:58

amp them :wink:

Title: Re: CO AXIAL PARCEL SHELF SPEAKERS
Post by: dragonfly on 02 August 2011, 11:46

So you want to disconnect the rear door speakers and add speakers to the shelf and use the exisiting door speaker connectors?

Don't ruin a shelf by cutting into it house speakers. Your best bet is to replace the fronts for better quality and leave the rear doors.

If you still want to put speakers on the shelf then either cut the connectors off the rear door speakers and attached a new length of wiring to the rear.  Or you can buy block connectors which attach to the existing connector and attach a length of wiring to the rear.

Title: Re: CO AXIAL PARCEL SHELF SPEAKERS
Post by: Tazzy on 14 August 2011, 12:40

i dont know about vws, but standard cabling is usually sh!te, so i wouldnt run a standard speaker and an after market more powerful speaker off one cable  :huh: