GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: Gareth on 25 July 2011, 20:04

Title: need tracking help
Post by: Gareth on 25 July 2011, 20:04

evening all,

i'm having a few problems setting the tracking both wheels are pointing out and either the track rod or ball joint needs to be wound in, but there as far in as they will go  :undecided:

i have mk2 16v non pas

any ideas?

thanks

Title: Re: need tracking help
Post by: The Mighty Elvi on 25 July 2011, 20:06

Are you sure?  The threads could be rusty or the lock nuts seized.

Title: Re: need tracking help
Post by: dweb1989 on 25 July 2011, 20:12

Bent stub axle?

Title: Re: need tracking help
Post by: Gareth on 25 July 2011, 20:28

Quote from: The Mighty Elvi on 25 July 2011, 20:06

Are you sure?  The threads could be rusty or the lock nuts seized.

100% there brand new and copper greased up...


how could the rear stub axle be the problem?

thanks

Title: Re: need tracking help
Post by: dweb1989 on 25 July 2011, 20:34

If it had, had an impact? Are the wheels sitting in the middle of the arch? Or are the new track rods not long enough?

Title: Re: need tracking help
Post by: Gareth on 25 July 2011, 20:44

well its all brand new because Ive rebuilt the car :) if any thing the rods are two long they need to be a bit shorter each and the will be in line! the rods are 40cm in length unsure if thats correct, I'm thinking  cutting them down but thought id ask to see if any one had any ideas first