GolfGTIforum.co.uk

Model specific boards => Golf mk6 => Topic started by: Snoopy on 22 July 2011, 07:48

Title: Alarm LED stays on then flashes? Now fixed. Siren replaced.
Post by: Snoopy on 22 July 2011, 07:48
Im at work so don't have a manual handy.
I think my alarm LED has changed the way it acts.
Could someone have a look in the manual to tell me whats happening please.

It seems to

3 quick Flashes
Stays on fully for about 5 seconds
Then starts to flash.

Im sure it only quick flashed then went to normal flashes before.  :undecided:

Title: Re: Alarm LED flashing (anyone got a manual handy) LED stays on.
Post by: Snoopy on 22 July 2011, 12:28
http://www.golfgtiforum.co.uk/index.php?topic=175432.0

That's normal snoopy, exactly what mine does, 4-5 quick flashes and then steady every 2 seconds give or take :smiley:

Great something else gone wrong by the look of it.
This cars jinxed from the start  :sad:
Title: Re: Alarm LED flashing (anyone got a manual handy) LED stays on.
Post by: p3asa on 22 July 2011, 13:32
I take it the amount flashes signifies something?
Title: Re: Alarm LED flashing (anyone got a manual handy) LED stays on.
Post by: Snoopy on 22 July 2011, 15:59
1-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
2E-Media Player 3 -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: Malfunction 0010
55-Xenon Range -- Status: OK 0000
56-Radio -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine (CCZ)       Labels: 06J-907-115-CCZ.clb
   Part No SW: 5K0 907 115     HW: 1K0 907 115 AA
   Component: 2.0l R4/4V TFSI     0040 
   Revision: AAH14---    Serial number:               
   Coding: 0403000C18070060
   Shop #: WSC 01357 011 00200
   VCID: E7D62531AFFD

No fault code found.
Readiness: 0000 0000

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: 1K0-907-379-60EC1F.clb
   Part No SW: 1K0 907 379 AH    HW: 1K0 907 379 AH
   Component: ESP MK60EC1   H30 0107 
   Revision: 00H30001   
   Coding: 163B600D092B0003680F06EC90220081340800
   Shop #: WSC 01357 011 00200
   VCID: 78F4F64D7243

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255)       Labels: 5K0-907-044.clb
   Part No SW: 5K0 907 044 BS    HW: 5K0 907 044 BS
   Component: Climatronic   H15 0709 
   Revision: 00003001   
   Coding: 0000000002
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_Climatronic A01006
   ROD: EV_Climatronic_VW36.rod
   VCID: 7DFAE7595D61

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels: 1K0-937-08x-09.clb
   Part No SW: 1K0 937 087 D    HW: 1K0 937 087 D
   Component: BCM PQ35  H   103 0575 
   Revision: 00103 AG   
   Coding: 48180A3E9025F1C0448800803400092443550088732D8960648000200000
   Shop #: WSC 01357 011 00200
   VCID: 32600465D4BF

   Part No: 1K2 955 119 F
   Component: Wischer 19011  21  0512
   Coding: 009795

   Part No: 1K0 955 559 AH
   Component: RLS 250110 05  54  0402
   Coding: 0330AD

   Part No: 1K8 951 171
   Component: DWA-Sensor 00  001 0104

   Part No: 1K8 951 605
   Component: LIN BACKUP HO  H10 9003

1 Fault Found:
01134 - Alarm Horn (H12)
            014 - Defective
             Freeze Frame:
                    Fault Status: 01101110
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 79
                    Mileage: 7523 km
                    Time Indication: 0
                    Date: 2016.14.19
                    Time: 08:06:44
             Freeze Frame:
                        Term 15 Off
                    Voltage: 14.05 V
                        OFF
                        ON
                        Term 50 Off
                        OFF
                        OFF


-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels: 5K0-959-655.clb
   Part No SW: 5K0 959 655 D    HW: 5K0 959 655 D
   Component: AirbagVW10    037 0606 
   Serial number: 003FKRA34V4V 
   Coding: 00003135
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_AirbaVW10SMEVW360 A01011
   ROD: EV_AirbaVW10SMEVW360_VW36.rod
   VCID: 3B7E294103F5

   Driver's Airbag Crash Sensor:
   Part No SW: 5K0 959 354     HW: 5K0 959 354
   Component: S.Sens.Fahr.V  H01 ----
   Serial number: 3572MSME1534144FZZZU

   Passenger Side Airbag Crash Sensor:
   Part No SW: 5K0 959 354     HW: 5K0 959 354
   Component: S.Sens.Beif.V  H01 ----
   Serial number: 3582MSME3167444EZZZ.

   Driver's Rear Airbag Crash Sensor:
   Component: S.Sens.Fahr.H  --- ----
   Serial number: 3512QSME0E354A00ZZZR

   Passenger's Rear Airbag Crash Sensor:
   Component: S.Sens.Beif.H  --- ----
   Serial number: 3522QSME0E004844ZZZQ

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel        Labels: 1K0-953-549-MY9.lbl
   Part No SW: 1K0 953 549 CF    HW: 1K0 953 549 CF
   Component: J0527           056 0111 
   Coding: 0000502
   Shop #: WSC 01357 011 00200
   VCID: 78F4F64D7243

   Part No: 5K0 959 542
   Component: E221__MFL-TAS   H05 0010 
   Coding: 00000130
   Shop #: WSC 00000 

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels: 5K0-920-xxx-17.clb
   Part No SW: 5K6 920 970 D    HW: 5K6 920 970 D
   Component: KOMBI         H03 0305 
   Serial number: 00000000000000
   Coding: 470F00
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04052
   ROD: EV_Kombi_UDS_VDD_RM09_VW36.rod
   VCID: 356A3F7925D1

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway        Labels: 1K0-907-530.lbl
   Part No SW: 1K0 907 530 AD    HW: 1K0 907 951
   Component: J533  Gateway   H07 0112 
   Revision:   H07 01    Serial number: 220110F2001754
   Coding: E9817F06000212000003
   Shop #: WSC 01357 011 00200
   VCID: 69D2A30939E9

No fault code found.

-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels: 5K0-920-xxx-25.clb
   Part No SW: 5K0 953 234     HW: 5K0 953 234
   Component: IMMO          H03 0305 
   Serial number: 00000000000000
   Coding: 000000
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03005
   ROD: EV_Immo_UDS_VDD_RM09_VW36.rod
   VCID: EAD05C05BCEF

No fault code found.

-------------------------------------------------------------------------------
Address 2E: Media Player 3 (J650)       Labels: 5N0-035-342.lbl
   Part No SW: 5N0 035 342 B    HW: 5N0 035 342 B
   Component: SG EXT.PLAYER H13 0090 
   Revision: A1001003    Serial number: 7667755703   
   Coding: 010000
   Shop #: WSC 01357 011 00200
   VCID: 2648E835E877

No fault code found.

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver        Labels: 1K0-959-701-MIN3.lbl
   Part No SW: 5K0 959 701 D    HW: 5K0 959 701 D
   Component: Tuer-SG         009 2140 
   Coding: 0000692
   Shop #: WSC 01357 011 00200
   VCID: 336E01612BA5

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist        Labels: 1Kx-909-14x-44.clb
   Part No: 1K0 909 144 J
   Component: EPS_ZFLS Kl. 74     3001 
   Revision: 00H17000   
   Shop #: WSC 01357 011 00200
   VCID: 31620B69D1B9

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass.        Labels: 1K0-959-702-MIN3.lbl
   Part No SW: 5K0 959 702 B    HW: 5K0 959 702 B
   Component: Tuer-SG         009 2114 
   Coding: 0000692
   Shop #: WSC 01357 011 00200
   VCID: 32600465D4BF

1 Fault Found:
00933 - Electric Window Motor; Passenger Side (V148)
            005 - No or Incorrect Basic Setting / Adaptation

-------------------------------------------------------------------------------
Address 55: Xenon Range        Labels: 5M0-907-357-V2.lbl
   Part No SW: 5M0 907 357 C    HW: 5M0 907 357 C
   Component: AFS-Steuergeraet    0142 
   Revision: 00H04000    Serial number:               
   Coding: 1443164
   Shop #: WSC 01357 011 00200
   VCID: 346C027D2EAB

   Part No: 7L6 941 329 B
   Component: AFS-Lst.-Modul l    0004 
   Coding: 00000022

   Part No: 7L6 941 329 B
   Component: AFS-Lst.-Modul r    0004 
   Coding: 00000022

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio (J503)       Labels: 5M0-035-1xx-56.clb
   Part No SW: 1K0 035 186 AA    HW: 1K0 035 186 AA
   Component: Radio RCD310  016 0049 
   Revision: 01000000    Serial number: VWZ1Z2K8011304
   Coding: 0100040004
   Shop #: WSC 01357 011 00200
   VCID: 65CAAF39D5F1

No fault code found.

-------------------------------------------------------------------------------
Address 62: Door, Rear Left        Labels: 1K0-959-703-GEN3.lbl
   Part No SW: 5K0 959 703 C    HW: 5K0 959 703 C
   Component: Tuer-SG         007 2101 
   Coding: 0000144
   Shop #: WSC 01357 011 1012552
   VCID: 346C027D2EAB

No fault code found.

-------------------------------------------------------------------------------
Address 72: Door, Rear Right        Labels: 1K0-959-704-GEN3.lbl
   Part No SW: 5K0 959 704 C    HW: 5K0 959 704 C
   Component: Tuer-SG         007 2101 
   Coding: 0000144
   Shop #: WSC 01357 011 1012552
   VCID: 356A3F7925D1

No fault code found.

End   ---------------------------------------------------------------------
Title: Re: Alarm LED flashing (anyone got a manual handy) LED stays on.
Post by: Snoopy on 22 July 2011, 16:02
My front passennger window had a hickup the other day and the auto up and down did not work im guessing that one of the faults?

Just tested THE ALARM and my alarm siren does not work anymore. I wonder were its located?  :angry:
Title: Re: Alarm LED stays on. (WERE IS THE ALARM HORN LOCATED ????????) now VAGCOMed
Post by: The Doc on 22 July 2011, 16:45
IMHO

Window fault as per the hiccup

When you say horn do you mean the alarm horn / siren or the cars main horn?

If it's the alarm horn I'm sure that if you locate it and unplug it then the cars main horn should take over ( this is based on theory and not tested )

Good luck mate and keep your chin up  :wink:
Title: Re: Alarm LED stays on. (WERE IS THE ALARM HORN LOCATED ????????) now VAGCOMed
Post by: Keithuk on 22 July 2011, 16:46
Geoff.

EOBD II Error Code: 01134

Fault Location:
Alarm Horn (H12)

Possible Cause:
Anti-Theft Alarm sporadically triggered.
Fuse(s) faulty.
Wiring and/or Connector(s) from/to Alarm Horn (H12) faulty.
Alarm Horn (H12) faulty.

Possible Solutions:
Check Fuse(s).
Check Wiring and/or Connector(s) from/to Alarm Horn (H12).
Check/Replace Alarm Horn (H12).

EOBD II Error Code: 00933

Fault Location:
Electric Window Motor; Passenger Side (V148): No or Incorrect Basic Setting / Adaptation

Possible Cause:
Window Automatic Run not working.
Pinch Protection limited.
Automatic Run & Pinch Protection not adapted.

Possible Solutions:
Adapt Automatic Run & Pinch Protection (see Special Notes).

Special Notes:
Pinch Protection Adaptation.
Make sure the window in question is completely closed.
Use the driver door window buttons to operate the window(s).
Roll down the window and keep holding the button down for 2 additional seconds after the window is already fully opened.
Roll up the window and keep holding the button up for 2 additional seconds after the window is already fully closed.
Now test the window automatic.

As taken from my Free EOBD II Error Codes Software (http://www.myturbodiesel.com/forum/f9/free-eobd-ii-error-codes-software-2919/)

A trip to the dealer?
Title: Re: Alarm LED stays on. (WERE IS THE ALARM HORN LOCATED ????????) now VAGCOMed
Post by: Snoopy on 22 July 2011, 16:54
The Doc
Door window was odd. It happened last Saturday as i was reversing off the 4 post ramp. I put the window down but it did not want to auto up so i did it up and down about 10 times from both passenger and drivers door to try and get it to work. Simple did not and i put it down to the mirror been foldeded and it been a quirt especially when it worked the next morning.

 
Alarm horn.
Its the alarm horn not working. To test it I sat in the car, set the alarm and waited for the alarm to arm. I then waved my arms about. Nice flashing hazard lights but no siren/horn  :cry:
It use to work as i have tried it in the past so i knew what it sounded like if i ever heard an alarm go off.
I only notice the difference in the flashing of the LED this morning and so i would suspect it was fine until today.

Keith
I just want to check my waxoyl from a year ago has not upset the alarm horn first (It should not have). Or they may try and bill me for it you know what dealers are like!  :embarassed:


Is the siren that metal box thing in the drivers wheel arch?
Title: Re: Alarm LED stays on. (WERE IS THE ALARM HORN LOCATED ????????) now VAGCOMed
Post by: Keithuk on 22 July 2011, 17:20
Is the siren that metal box thing in the drivers wheel arch?
There is a metal box SENSORED for security reasons   i noticed when I waxoyl mine. I'm looking at ETKA and it show 2 makes of siren Bosch and Cobra but it doesn't show where they are located.

Electronic siren Bosch >> 05/12/2010 - 1K0 951 605 C - £114.72
Electronic siren Cobra >> 05/12/2010 - 1K8 951 605 A - £114.72 dropped on 01/03/2011 for 1K8 951 605 B - £110.28

In the same picture it shows the ultrasound unit and a horn whether is uses an horn as well but it doesn't show a part number for the horn?
Title: Re: Alarm LED stays on. (WERE IS THE ALARM HORN LOCATED ????????) now VAGCOMed
Post by: The Doc on 22 July 2011, 17:24
Ok, is your window all good now?

I'll try to find my horn ( :grin:)
Title: Re: Alarm LED stays on. (WERE IS THE ALARM HORN LOCATED ????????) now VAGCOMed
Post by: Snoopy on 22 July 2011, 17:27
The window seems to work ok now. Just wonder for how long.

Keith thanks for the info.


SENSORED for security reasons  


All that heavy rain this past week may have killed my alarm siren.  :cry:


Title: Re: Alarm LED stays on. (WERE IS THE ALARM HORN LOCATED ????????) now VAGCOMed
Post by: mike. on 22 July 2011, 18:07
Looks like the right place Geoff, here is some info if it helps any.

SENSORED for security reasons.
Title: Re: Alarm LED stays on. (WERE IS THE ALARM HORN LOCATED ????????) now VAGCOMed
Post by: Snoopy on 22 July 2011, 18:14
Thanks Mike.

For security reason im sure everyone is worried about i will remove this thread once its sorted.

Anyone know what fuse it is as i should really check that first  :grin:

The alarm actually works except i have no sound. :grin:
Title: Re: Alarm LED stays on. SIREN not work, Fuse location?
Post by: Buck on 22 July 2011, 18:56
Geoff

This is exactly what happened to my alarm - replaced under warranty. Only downside is that there are two makes of alarm and they had to order mine in.
Title: Re: Alarm LED stays on. SIREN not work, Fuse location?
Post by: Snoopy on 22 July 2011, 19:09
^Thanks.

Im going to take a quick look this weekend just to make sure its not my fault (should not be as waxoyl was a year and a half ago now but best to check.

Then i think its time to make my list of issues and visit the dealer again to get the alarm siren looked at first then,
+ the squeeks(door rubbers & catches)
+ rattles (3 of the door panels loose near window cause rattles, sunroofs rattle foams gone awol, dash speedo area rattle, sunvisor mirror cover rattle, rear hatch rattle) 
+ rear passenger side suspension thump
+ engine hesitant at 30mph 3rd gear when i put my foot down (~2500rpm to 3500rpm)
+ waste gate rod rattle at 2500-3000rpm 
+ drivers seat bolster premature ware since ~ 2000 miles
+ strange beep beep click/clunk from engine bay every time i turn the car off and get out.
+ rear washer dribble after use.
+ that passenger window blip it had
+ Paint issues (lack of coverage and a couple of issues),
+ Foam in arches issues, (open cell and soke up water)
+ Xenons seam to have a dead spot in the beam
+ heater that does not seem to regulate temp very well, seem to like to freeze me sometimes.
+ more i have probably forgot about. :grin:

Its a bit worrying now i know what the alarm LED ment. As going by the miles i know its been like this since 8am Wednesday morning and its been parked in a ruff part of the city most this week in ear shot but not eye line. I would have never known if something had happened.
Title: Re: Alarm LED stays on. SIREN not work, Fuse location?
Post by: Buck on 22 July 2011, 19:12
I know what you mean

I only found out that mine wasn't working when Darren scanned my car with VCDS when he set up my RNS 510

Might be worth everyone checking that theirs works OK - easy enough check and could save hassle down the line.
Title: Re: Alarm LED stays on. SIREN not work, Fuse location?
Post by: mike. on 22 July 2011, 19:22
Sensored for security reasons

I think this diagram is for LHD so you may have to reverse the way you look at it, eg. Fuse 1 is top right

(http://www.thewindinglane.co.uk/images/mk6gti/alarm/fuse.jpg)
Title: Re: Alarm LED stays on. SIREN not work, Fuse location?
Post by: Snoopy on 22 July 2011, 19:25
Thanks again Mike  :smiley:
Sorry to be a pain as you have been more than helpful and its much apreciated, but do you have a list of what fuse is what for future reference you could post up when you have a few minutes as i think it would be very useful to all.
Thanks
Geoff.
Title: Re: Alarm LED stays on. SIREN not work, Fuse location?
Post by: mike. on 22 July 2011, 19:39
Cars from Novemember 2009

F1 - Fuse 1 on fuse holder C -SC1- 10 A
         16-pin connector -T16- Diagnostic connection 15a
          Switch and instrument illumination regulator -E20-   
          Air mass meter -G70-   
          Auxiliary heater operation relay -J485-   
          Electronically controlled damping control unit -J250-   
          Headlight range control unit -J431-   
          Heater element for crankcase breather -N79-   
          Left headlight range control motor -V48-   
          Right headlight range control motor -V49-   
          Adaptive cruise control unit -J428-   
          Headlight range control regulator -E102-   
          Brake light switch -F-   
          Park assist steering control unit -J791-   
          Actuator for structure-borne sound -R214-3   
          Voltage stabiliser -J532-5   

F2 - Fuse 2 on fuse holder C -SC2- 10 A
          Light switch -E1- 15a
          Brake light switch -F-   
          ABS control unit -J104-   
          Control unit in dash panel insert -J285-   
          Trailer detector control unit -J345-   
          Power steering control unit -J500-   
          Data bus diagnostic interface -J533-   
          Fuel pump control unit -J538-   
          Voltage stabiliser -J532-2   
          Selector lever sensors control unit -J587-   
          Fuel pump relay -J17-1   
          Engine control unit -J623-4   
          Driving program button -E598-3   
          Starter relay 1 -J906-2   
          Starter relay 2 -J907-2   
          Mechatronic unit for dual clutch gearbox -J743-   
          All-wheel drive control unit -J492- 

F3 - Fuse 3 on fuse holder C -SC3- 5 A
      Airbag control unit -J234- 15a

F4 - Fuse 4 on fuse holder C -SC4- 5 A
         High-pressure sender -G65- 15a
          Oil level and oil temperature sender -G266-   
          Seat occupied recognition control unit -J706-   
          Automatic anti-dazzle interior mirror -Y7-   
          Air quality sensor -G238-   
          Reversing light switch -F4-   
          TCS and ESP button -E256-   
          Heater/heat output switch -E16-   
          Garage door opener button 1 -E392-   
          Automatic anti-dazzle interior mirror -Y7-   
         Tyre pressure monitor display button -E492-   
         Park assist steering control unit -J791-   
         Anti-dazzle interior mirror button -E386-   
          Air conditioning system delay relay -J70-   
          Airbag control unit -J234-   
          Start/Stop operation button -E693-2   
          Power steering control unit -J500-   

F5 - Fuse 5 on fuse holder C -SC5- 10 A
      Control unit for cornering light and headlight range control -J745- right 15a

F6 - Fuse 6 on fuse holder C -SC6- 10 A
      Control unit for cornering light and headlight range control -J745- left -

F7 - Fuse 7 on fuse holder C -SC7- - - Not assigned -

F8 - Fuse 8 on fuse holder C -SC8- - - Not assigned -

F9 - Fuse 9 on fuse holder C -SC9- - - Not assigned -

F10 - Fuse 10 on fuse holder C -SC10- - - Not assigned -

F11 - Fuse 11 on fuse holder C -SC11- - - Not assigned -

F12 - Fuse 12 on fuse holder C -SC12- 10
         Driver door control unit -J386- Central locking 30a
          Front passenger door control unit -J387- Central locking   

F13 - Fuse 13 on fuse holder C -SC13- 10 A
         Light switch -E1-   
         16-pin connector -T16- Diagnostic connection   
         Rain and light sensor -G397-   
         Heated rear window relay -J9- 
         Fog light switch -E7- 
         Magnetic field sender for compass -G197-   

F14 - Fuse 14 on fuse holder C -SC14- 10 A
        Climatronic control unit -J255- 30a
         Air conditioning system control unit -J301- 
          Selector lever sensors control unit -J587-   
          Automatic gearbox control unit -J217-   
         Tiptronic switch -F189- 
          Remote control receiver for auxiliary coolant heater -R149-   
          Onboard supply control unit -J519-   
             
             

F15 - Fuse 15 on fuse holder C -SC15- 20 A
         Rear left door control unit -J388- Central locking   
       - Rear right door control unit -J389- Central locking 30a
          Rear lid handle release button -E234- 30a

F16 - Fuse 16 on fuse holder C -SC16- 10 A
        Reversing camera -R189-   

F17 - Fuse 17 on fuse holder C -SC17- 10 A
         Alarm horn -H12- 30a
         Interior monitor send and receive module 1 -G303-   
         Interior monitor send and receive module 2 -G305-   
         Vehicle inclination sender -G384-   
         Onboard supply control unit -J519-   
          Dual tone horn relay -J4-   

F18 - Fuse 18 on fuse holder C -SC18- - - Not assigned -

F19 - Fuse 18 on fuse holder C -SC19- 5 A
         Special vehicle control unit -J608- 30a
          Engine speed governor control unit -J542-   

F20 - Fuse 20 on fuse holder C -SC20- - - Not assigned -

F21 - Fuse 21 on fuse holder C -SC21- - - Not assigned -

F22 - Fuse 22 on fuse holder C -SC22- 40 A
        Fresh air blower control unit -J126- 30a

F23 - Fuse 23 on fuse holder C -SC23- 30 A
          Driver door control unit -J386- Window regulator 30a
          Front passenger door control unit -J387- Window regulator   

F24 - Fuse 24 on fuse holder C -SC24- 20 A
        Onboard supply control unit -J519- 30a

F25 - Fuse 25 on fuse holder C -SC25- 25 A
        Heated rear window -Z1- 30a
          Heated rear window relay -J9-   
          Fresh air blower relay -J13-   

F26 - Fuse 26 on fuse holder C -SC26- 30 A
        Rear left door control unit -J388- Window regulator 30a
         Rear right door control unit -J389- Window regulator 

F27 - Fuse 27 on fuse holder C -SC27- 15 A
        Fuel pump control unit -J538- 30a
         Fuel pump relay -J17-   
         Fuel supply relay -J643- 
         Relay for supplementary fuel pump -J832-   

F28 - Fuse 28 on fuse holder C -SC28- 15 A
          Radio -R-2 30a
          TV tuner -R78-2   
          Control unit with display for radio and navigation -J503-2   

F29 - Fuse 29 on fuse holder C -SC29- - - Not assigned -

F30 - Fuse 30 on fuse holder C -SC30- 20 A
        Automatic gearbox control unit -J217- 30a
        Mechatronic unit for dual clutch gearbox -J743-   

F31 - Fuse 31 on fuse holder C -SC31- 20 A
        Vacuum pump for brakes -V192- 30a

F32 - Fuse 32 on fuse holder C -SC32- 30 A
      DC/AC converter with socket, 12 V - 230 V -U13- 30a
      10 A   Special vehicle control unit -J608-   

F33 - Fuse 33 on fuse holder C -SC33- 25 A
        Sliding sunroof adjustment control unit -J245- 30a

F34 - Fuse 34 on fuse holder C -SC34- 15 A
        Driver seat lumbar support adjustment switch -E176- 30a
         Front passenger seat lumbar support adjustment switch -E177-   

F35 - Fuse 35 on fuse holder C -SC35- 10 A
        Electronically controlled damping control unit -J250- 30a

F36 - Fuse 36 on fuse holder C -SC36- 20 A
        Headlight washer system relay -J39- 30a
          Headlight washer system pump -V11-   

F37 - Fuse 37 on fuse holder C -SC37- 30 A
       Heated front seats control unit -J774- 30a

F38 - Fuse 38 on fuse holder C -SC38- - - Not assigned -

F39 - Fuse 39 on fuse holder C -SC39- - - Not assigned -

F40 - Fuse 40 on fuse holder C -SC40- 40 A
        Air conditioning system control unit -J301- 75a
         Auxiliary heater operation relay -J485-   
          Heater/heat output switch -E16-   

F41 - Fuse 41 on fuse holder C -SC41- 15 A
        Rear window wiper motor -V12- 75a

F42 - Fuse 14 on fuse holder C -SC42- 20 A
        Blocking diode 2 -J811- 75a
         Cigarette lighter -U1-   
         12 V socket -U5-   

F43 - Fuse 43 on fuse holder C -SC43- 15 A
        Trailer detector control unit -J345- 30a

F44 - Fuse 44 on fuse holder C -SC44- 20 A
        Trailer detector control unit -J345- 30a

F45 - Fuse 45 on fuse holder C -SC45- 15 A
        Trailer detector control unit -J345- 30a

F46 - Fuse 46 on fuse holder C -SC46- - - Not assigned -

F47 - Fuse 47 on fuse holder C -SC47- 5 A
        Control unit in dash panel insert -J285-2 30a

F48 - Fuse 48 on fuse holder C -SC48- 10 A
        Magnetic field sender for compass -G197-2   
        - Mobile telephone operating electronics control unit -J412-2 30a

F49 - Fuse 49 on fuse holder C -SC49- - - Not assigned
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: Hartside on 23 July 2011, 12:34
Great info, but probably time to remove from the forum away from the eyes of those that would do bad things. The fuse location in particular is too much info for them
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: Snoopy on 23 July 2011, 14:03
Great info, but probably time to remove from the forum away from the eyes of those that would do bad things. The fuse location in particular is too much info for them
I have sensored the thread for you but left the fuses info as i think thats important info for anyone that may have a problem with something in the future.
The alarm will have a battery backup as its thatcham cat1 standard so removing the fuse would not stop the alarm anyway.

I may remove the thread once i have the problem sorted.
 
Title: Re: Alarm LED stays on. SIREN not work, Fuse location?
Post by: The Doc on 23 July 2011, 18:29
^Thanks.

Im going to take a quick look this weekend just to make sure its not my fault (should not be as waxoyl was a year and a half ago now but best to check.

Then i think its time to make my list of issues and visit the dealer again to get the alarm siren looked at first then,
+ the squeeks(door rubbers & catches)
+ rattles (3 of the door panels loose near window cause rattles, sunroofs rattle foams gone awol, dash speedo area rattle, sunvisor mirror cover rattle, rear hatch rattle) 
+ rear passenger side suspension thump
+ engine hesitant at 2500rpm
+ waste gate rod rattle at 2500-3000rpm 
+ drivers seat bolster premature ware
+ strange beep beep click/clunk from engine bay every time i turn the car off and get out.
+ rear washer dribble
+ that passenger window blip it had
+ Ware on seat bolster after 4K,
+ Paint issues (lack of coverage and a couple of issues),
+ Foam in arches issues, (open cell and soke up water)
+ Xenons seam to have a dead spot in the beam
+ heater that does not seem to regulate temp very well
+ more i have probably forgot about.

Its a bit worrying now i know what the alarm led ment. As going by the miles i know its been like this since 8am Wednesday morning and its been parked in a ruff part of the city most this week in ear shot but not eye line. I would have never known if something had happened.

No wonder you want to change her  :sick:
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: Snoopy on 23 July 2011, 18:38
I don't really, its our other car we want to change. I do wish the niggles with my mk6 would not multiply though and it was like some of the others on here.  :sad:
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: The Doc on 23 July 2011, 18:43
It's no good when you have a caf like this, I had two mk5 r32's and the first one was riddled with faults but the second was perfect.

Good on you for sticking with her - I think I'd not have been so patient  :angry:
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: Jimble on 23 July 2011, 18:52
I've probably got about 75% of the issues that you have snoopy, i reckon i'll be going to the stealers with a very similar list soon! :angry:
Title: Re: Leaking rear washer nozzle
Post by: Keithuk on 24 July 2011, 02:29
+ rear washer dribble
As I said in the other forum you don't normally here of rear washer nozzles dripping in the UK this happens in the US normally.

Though I thought my rear washer nozzle was leaking earlier this year. You know when you do a wash/wipe on the rear screen it doesn't wipe all the water off it slowly runs down the screen and you have to do a wipe again to clear it. Mine always ran down the screen where the nozzle is so I thought mine was leaking but with closer inspection it wasn't it just dripped around the same place.
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: am1w on 24 July 2011, 09:31
My lord Snoops and Jimble. That list of issues is pretty horrendous and would drive me to 'drink'.
Not funny in the least.
Apart from my wonky rear bumper in the flat number plate area (replaced under warranty), self-inflicted damage to front and rear bumpers, vandalism to the roof (twice) and minor damage to the rear screen, my car is faultless and totally rattle free. I would have thought they should all be so. Anything less is unacceptable IMO.
Hope you get these problems attended to and more importantly fixed to your satisfaction.
Title: Re: Leaking rear washer nozzle
Post by: Snoopy on 24 July 2011, 10:14
+ rear washer dribble
As I said in the other forum you don't normally here of rear washer nozzles dripping in the UK this happens in the US normally.

Though I thought my rear washer nozzle was leaking earlier this year. You know when you do a wash/wipe on the rear screen it doesn't wipe all the water off it slowly runs down the screen and you have to do a wipe again to clear it. Mine always ran down the screen where the nozzle is so I thought mine was leaking but with closer inspection it wasn't it just dripped around the same place.
I can leeve the car over night in the garage, then reverese out and as soon as i pull forward water comes out the washer jet and dribbles down the screen.
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: Keithuk on 24 July 2011, 11:55
I said it was mor pronounce in the States.

Did VW finally find a fix to the rear washer leak? (http://www.golfmk6.com/forums/showthread.php?t=14601&)

has anyone got their rear windshiled washer leak fixed? (http://www.golfmk6.com/forums/showthread.php?t=6929&)

Any fix for rear wiper washer leak? (http://www.golfmk6.com/forums/showthread.php?t=3570&)
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: Snoopy on 24 July 2011, 12:01
Thanks Keith, You do get around those forums  :wink:
I just wanted to clarify when it happens.  :smiley:

 
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: mortygt140 on 30 July 2011, 16:50
Can I just add, I have now seen around 7-8 mk6 golf that have had this defective horn problem I'm wondering if this is a fault from the manufacturer? has I have not seen it has many times in such a short space, and only seen it on 1 mk5 GTi?

Maybe flag this up with the dealer?

Darren

Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: Snoopy on 30 July 2011, 17:27
Thanks Darren.
It is booked in for what they called a diagnostic booking on Tuesday even though on Monday i told them about it been a common fault and showed them a VCDS scan, if i had needed a Courtesy car it would have been an extra 2 weeks  :shocked:
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: R32UK on 30 July 2011, 19:39
I have stayed away from this thread only as I knew that I would be posting the obvious....


the mk6 is not as good as people tend to think. I certainly wont miss mine  :lipsrsealed:
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: am1w on 30 July 2011, 19:44
I have stayed away from this thread only as I knew that I would be posting the obvious....
the mk6 is not as good as people tend to think. I certainly wont miss mine  :lipsrsealed:

You should not as you do produce a very balanced view.  :grin:
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: R32UK on 30 July 2011, 19:46
I have stayed away from this thread only as I knew that I would be posting the obvious....
the mk6 is not as good as people tend to think. I certainly wont miss mine  :lipsrsealed:

You should not as you do produce a very balanced view.  :grin:

As i have had the pleasure of driving golfs other than the mk6 i think i do also :wink:
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: am1w on 30 July 2011, 19:47
I have stayed away from this thread only as I knew that I would be posting the obvious....
the mk6 is not as good as people tend to think. I certainly wont miss mine  :lipsrsealed:
You should not as you do produce a very balanced view.  :grin:
As i have had the pleasure of driving golfs other than the mk6 i think i do also :wink:

I agree with you.  :smiley:
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: mike. on 30 July 2011, 19:50
My MK5 , windscreen replaced (delaminating), steering rack replaced, paddle shifters replaced, all four monzas replaced.

My MK6 , nothing gone wrong so far, so I have the other view, love my MK6  :smiley:
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: am1w on 30 July 2011, 19:54
My MK5 , windscreen replaced (delaminating), steering rack replaced, paddle shifters replaced, all four monzas replaced.
My MK6 , nothing gone wrong so far, so I have the other view, love my MK6  :smiley:

Tornado Red Mk6 GTIs 2010 BW7/8 are super.  :smug:
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: mike. on 30 July 2011, 19:57
Tornado Red Mk6 GTIs 2010 BW7/8 are super.  :smug:

It was a good fortnight in Wolfsburg   :laugh:
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: Snoopy on 30 July 2011, 20:16
Tornado Red Mk6 GTIs 2010 BW7/8 are super.  :smug:

It was a good fortnight in Wolfsburg   :laugh:
not for blue.
Title: Re: Alarm LED quick flash then stays on for a few seconds then starts to flash ?
Post by: Snoopy on 03 August 2011, 17:15
Cars been at the dealers for two days now. Its odd the feeling been without it.

They replaced the siren. So it now works.
Title: Re: Alarm LED stays on. SIREN not work, Fuse location?
Post by: Snoopy on 03 August 2011, 17:26
I've probably got about 75% of the issues that you have snoopy, i reckon i'll be going to the stealers with a very similar list soon! :angry:

Cars been in for two days to Benfield Newcastle and just picked it up i asked about most the issues i had and the answers are below in blue for the ones i asked about, Im not sure if any are the same as yours but they may help.



Then i think its time to make my list of issues and visit the dealer again to get the alarm siren looked at first then, Siren replaced
+ the squeeks(door rubbers & catches) Followed the TPI to 'lube with Krytox'
+ rattles (3 of the door panels loose near window cause rattles, Followed TPI for 'cracking noise from B-pillar or front doors' and TPI for 'door/door trim - noises'
+ sunroofs rattle foams gone awol, Cannot fault rattle, Missing part not found on database
+ dash speedo area rattle, sunvisor mirror cover rattle Could not fault 
+ Intermit engine hesitant at 30mph 3rd gear when i put my foot down (~2500rpm to 3500rpm) Can not fault
+ waste gate rod rattle at 2500-3000rpm Followed TPI for 'rattling noises from engine/exhaust system' , part on back order
+ drivers seat bolster premature ware since ~ 2000 miles Non warrenty - wear and tear
+ strange beep beep click/clunk from engine bay every time i turn the car off and get out. From throttle valve normal operation
+ rear washer dribble after use. No fault found
+ that passenger window blip it had tested with VAS 5051B 'Incorrect basic setting/adaptation sporadic', Reset
+ Paint issues (lack of coverage and a couple of issues),
+ Foam in arches issues, (open cell and soke up water)
+ Xenons seam to have a dead spot in the beam
+ heater that does not seem to regulate temp very well, seem to like to freeze me sometimes.
+ more i have probably forgot about. :grin:

Its a bit worrying now i know what the alarm LED ment. As going by the miles i know its been like this since 8am Wednesday morning and its been parked in a ruff part of the city most this week in ear shot but not eye line. I would have never known if something had happened.
Title: Re: Alarm LED stays on then flashes? Now fixed. Siren replaced.
Post by: david25 on 03 August 2011, 19:25
Snoopy, I havent read the whole thread but spotted the nozzle problem, are you aware of?



Rear Washer Nozzle Drips After Use TSB 2023248

The water from the rear washer nozzle continues to run out after washer is shut off.

Technical Backround

Rear washer hose retains washer solvent after use. Without a check valve the excess water will continue to drain off out of the washer nozzle.

Service

Fit a non-return valve in the hose of the rear window washing system.

443-955-665 hose
113-955-975-C valve
000-979-992-A sleeve
1J0-955-875-R couplpiece
Title: Re: Alarm LED stays on then flashes? Now fixed. Siren replaced.
Post by: Jimble on 04 August 2011, 19:56
Blimey snoops, not quite the results you (or anyone else on here) were hoping for aye? I suppose the main issues from that list that i have that they've sorted are the waste gate rattle, the creaking seals and the clicking B pillar trim, it's typical that they're trying to fob you off with the rest!
Did they give you an idea when they'll be getting the part for the waste gate rattle?
Title: Re: Alarm LED stays on then flashes? Now fixed. Siren replaced.
Post by: Snoopy on 05 August 2011, 07:52
14th August they hope as its on back order.
They very kindly supplied me with TPI's (Technical product information) (what a TPS is called in the UK) for the waste gate rattle, creaking seals and clicking B-pillar  :smiley:
All are known TPI issues and easy sorted for you by your dealer.
Title: Re: Alarm LED stays on then flashes? Now fixed. Siren replaced.
Post by: Jimmymature on 05 August 2011, 20:53
14th August they hope as its on back order.
They very kindly supplied me with TPI's (Technical product information) (what a TPS is called in the UK) for the waste gate rattle, creaking seals and clicking B-pillar  :smiley:
All are known TPI issues and easy sorted for you by your dealer.

Tell me more of the clicking B-pillar mate? what are the syptoms?


Cheers,


Jim
Title: Re: Alarm LED stays on then flashes? Now fixed. Siren replaced.
Post by: Snoopy on 05 August 2011, 21:10
It makes a ticking or cracking noise as your driving along on uneven roads.
It lists the causes as
Door lock and locking bar (clean and greeze).
Or B-pillar (fix foam tape in the join of the two panels).
Or open weld connections of plastic parts on the rear of the door trim (heat the plastic to remake the join)
Title: Re: Alarm LED stays on then flashes? Now fixed. Siren replaced.
Post by: Jimble on 09 August 2011, 19:58
I wonder if evo could sort a full list of the known TPS/TPI issues with the mk6 so at least we'd know what VW actually know about that they can fix and what ussues we have that they can't/won't?
Title: Re: Alarm LED stays on then flashes? Now fixed. Siren replaced.
Post by: R32UK on 09 August 2011, 20:36
Burn down the dealership i say!!!  :laugh: :laugh: :laugh:
Title: Re: Alarm LED stays on then flashes? Now fixed. Siren replaced.
Post by: Rhyso on 09 August 2011, 20:46
Burn down the dealership i say!!!  :laugh: :laugh: :laugh:

Think most people have beaten you to it  :laugh: :laugh:
Title: Re: Alarm LED stays on then flashes? Now fixed. Siren replaced.
Post by: am1w on 09 August 2011, 20:49
Burn down the dealership i say!!!  :laugh: :laugh: :laugh:
Think most people have beaten you to it  :laugh: :laugh:

Hoodies. :shocked:
Title: Re: Alarm LED stays on then flashes? Now fixed. Siren replaced.
Post by: R32UK on 09 August 2011, 22:32
Burn down the dealership i say!!!  :laugh: :laugh: :laugh:
Think most people have beaten you to it  :laugh: :laugh:

Hoodies. :shocked:

No.. it was a bunch of posh tw4ts in brand new VW's... think they have had enough and decided to rebel  :lipsrsealed:
Title: Re: Alarm LED stays on then flashes? Now fixed. Siren replaced.
Post by: Snoopy on 10 August 2011, 07:42
Burn down the dealership i say!!!  :laugh: :laugh: :laugh:
Don't tempt me. Its took me a week to calm down before i feel calm enought to think about contacting them about what damage they have done.
http://www.golfgtiforum.co.uk/index.php?topic=202331.0
They also managed to put two lever marks on the door panel too when removing the panel below the armrest but i was not going to mention that to them as i know how hard it can be to remove panels like that and so i was going to live with it. Until i noticed the damage to the sills on the link above caused by them lifting the car, that was just negligence :angry:, they cannot say it was VWs fault either as they managed to not mark those area when it was in for a service in March!
Title: Re: Alarm LED stays on then flashes? Now fixed. Siren replaced.
Post by: Snoopy on 07 September 2011, 20:55
Well im f**king fuming.  :angry:
As my cars back in there tomorrow to have fixed the sealent they ripped off the sills i thought i better check everything else they touched.

Wheel arch liner. The screws have been over tightened and most ripped through the plastic.  :angry: FFS!!!!

They put two marks on the door panel when removing it.

Everything they touched they screwed up!!!!

ARRRRRRRRRRRRRRRRR

Title: Re: Alarm LED stays on then flashes? Now fixed. Siren replaced.
Post by: R32UK on 07 September 2011, 21:16
... dont worry snoops, i know how you feel!!!  :angry: