GolfGTIforum.co.uk

General => The garage => Diagnostics - VagCom / VCDS => Topic started by: snifferdog on 14 July 2011, 18:25

Title: Gotta code I need help with.....
Post by: snifferdog on 14 July 2011, 18:25

Hi all, I just wondered if anyone can tell me what the code 17924 is?! Ive got a cable and a book but it isnt in there??!!

Thanks.

Title: Re: Gotta code I need help with.....
Post by: BarryMKIV on 14 July 2011, 19:02

17924/P1516/005398 - Intake Manifold Valve (N156): Open Circuit

Possible Causes:
Wiring from/to Intake Manifold Valve (N156) faulty
Intake Manifold Valve (N156) faulty

Possible Solutions:
Check/Replace Intake Manifold Valve (N156)
Perform Output Test.
Use Scope to check Activation Signal while performing an Output Test.

Title: Re: Gotta code I need help with.....
Post by: RTechUK on 14 July 2011, 19:11

Will the code come straight back as soon as u clear it?

Title: Re: Gotta code I need help with.....
Post by: snifferdog on 14 July 2011, 19:14

Quote from: RTechUK on 14 July 2011, 19:11

Will the code come straight back as soon as u clear it?

Yes it does mate.

Title: Re: Gotta code I need help with.....
Post by: snifferdog on 14 July 2011, 19:15

Quote from: BarryMKIV on 14 July 2011, 19:02

17924/P1516/005398 - Intake Manifold Valve (N156): Open Circuit

Possible Causes:
Wiring from/to Intake Manifold Valve (N156) faulty
Intake Manifold Valve (N156) faulty

Possible Solutions:
Check/Replace Intake Manifold Valve (N156)
Perform Output Test.
Use Scope to check Activation Signal while performing an Output Test.

Thanks for the help mate, thats brilliant!


Not that I understand any of it  :grin: :grin:

Title: Re: Gotta code I need help with.....
Post by: RTechUK on 14 July 2011, 19:22

Pop I over one day in the week and I will do a pin out test to see what's at fault, so you don't end up wasting your money on parts u might not need.  Just bring hobnobs to keep us happy.

Title: Re: Gotta code I need help with.....
Post by: snifferdog on 14 July 2011, 19:23

Quote from: RTechUK on 14 July 2011, 19:22

Pop I over one day in the week and I will do a pin out test to see what's at fault, so you don't end up wasting your money on parts u might not need.  Just bring hobnobs to keep us happy.

Will do mate!! Thanks for that!