GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: benmanc on 12 July 2011, 12:00

Title: Interior Sensor Fault
Post by: benmanc on 12 July 2011, 12:00

My alarm keeps going off and its starting to do my head in.  It could be a problem with my door lock module as that needs replacing but im also getting code 01135.

I found a page on mkIV's which says...

Quote

When the alarm has gone off you can find out what set it off by using VAG-COM.  Go into the CCM (address 46) and look at measuring group 16.

Now, I dont understand what this measuring group 16 means?  What do I go on once im on the CCM module on the programme?

Title: Re: Interior Sensor Fault
Post by: Ant1981 on 12 July 2011, 12:10

01135 - Interior Monitoring Sensors: Open Circuit
Possible Causes

    Wiring/Connector from/to Interior Monitoring Sensors faulty
    Interior Monitoring Sensors not installed

Possible Solutions

    Check/Repair Wiring/Connector from/to Interior Monitoring Sensors
        See Measuring Blocks
    Check Interior Monitoring Sensors Installation

Title: Re: Interior Sensor Fault
Post by: benmanc on 12 July 2011, 21:42

Will have a look although not a clue what to look for on the connections or where the other end goes

Title: Re: Interior Sensor Fault
Post by: rhys1927 on 16 July 2011, 08:59

Also check that your rear washer jet isn't leaking.

The leak can cause the alarm to continuously go off!

Title: Re: Interior Sensor Fault
Post by: benmanc on 16 July 2011, 09:18

Its a fault with the interior sensor not the boot sensor.