GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: Tuks87 on 10 July 2011, 20:54

Title: 2.8 VR6 / 2.9 Manifold
Post by: Tuks87 on 10 July 2011, 20:54
Will the 2.9 Corrado inlet manifold fit straight onto my 2.8 VR6?!!
Title: Re: 2.8 VR6 / 2.9 Manifold
Post by: Wayne on 10 July 2011, 21:43
Yes I believe it does.  :smiley:
Title: Re: 2.8 VR6 / 2.9 Manifold
Post by: Mikester on 10 July 2011, 23:44
Supposed to give good gains i believe.
Title: Re: 2.8 VR6 / 2.9 Manifold
Post by: OakeyDoak16v on 10 July 2011, 23:48
Stick it on it'll be better than the original. Even better if you add a ported throttle body, 6 branch mani and decent exhaust system - then a Re -map!!!  :smiley:
Title: Re: 2.8 VR6 / 2.9 Manifold
Post by: Tuks87 on 11 July 2011, 07:30
Thanks for the replys!!
Title: Re: 2.8 VR6 / 2.9 Manifold
Post by: Malz0r on 11 July 2011, 10:11
2.9 are all obd1 and I don't think they fit straight on a late spec obd2 golf iv been told you need an adapter plate for the throttle body! But if you have an older obd1 your fine anyway!