GolfGTIforum.co.uk
General => The garage => Diagnostics - VagCom / VCDS => Topic started by: benmanc on 03 July 2011, 20:29
-
I scanned my car the other day as I had a boost leak which I have now sorted. I have an ebay usb cable with the free version of vag com.
It had this below when I scanned it. I think its not showing what the faults are as its the free version? Is that correct? and does anybody know what the faults are from what it shows below?
VCDS-Lite Version: Release 1.1
Saturday, 02 July 2011, 08:58:09.
Chassis Type: 1J - VW Golf/Bora IV
Scan: 01,02,03,08,15,16,17,19,22,29,35,36,37,39,46,47,55,56,57,75,76
-------------------------------------------------------------------------------
Address 01: Engine Labels: Redir Fail!
Controller: 06A 906 018 CG
Component: 1.8L R4/5VT MOTR HS D02
Coding: 04000
Shop #: WSC 00028
VCID: 69A53EA70077
No fault code found.
Readiness: N/A
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 1J0-907-37x-ABS.LBL
Controller: 1J0 907 379 Q
Component: ABS/EDS 20 IE CAN 0001
Coding: 13504
Shop #: WSC 00028
VCID: 3FF1C0FF2E73
No fault code found.
-
from what i can see, there are no faults, appart from what i imagine would be a link error :undecided:
-
It says no fault code found.
It does however only show the first two modules, I presume that you are using the autoscan faculty and its booting you out after scanning address 3. Yes?
Have you tried scanning the modules individually?