GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: cossiemark on 02 June 2011, 18:24

Title: can't select reverse
Post by: cossiemark on 02 June 2011, 18:24

Right i had one of the gear linkages brake at the weekend on my mk2 golf gti the small plastic 1.
well fitted another 1 tonight but where 1st should be i get 3rd and i get 1st when i put it in reverse any ideas??
cheers mark

Title: Re: can't select reverse
Post by: tech1889 on 02 June 2011, 19:16

in the maintenance section i think theres a thread for setting up gear linkages  :smiley:

Title: Re: can't select reverse
Post by: hennoir on 03 June 2011, 20:24

yeah sounds like it just needs setting up again, as above think ive seen that maint guide/help...i have a similar ssue but kinda the other way round, in that can get 5th very well.....

Title: Re: can't select reverse
Post by: i_am_me on 03 June 2011, 20:34

your gear selector is set wrong in the engine bay.
at the middle bottom and back of your engine bay you can see your gear linkages.
on the bar that runs straight under your car to your gear lever there is an adjuster on the end.
it has a 13mm bolt through it,if you slacken that off and turn it towards the passanger side then tighten it back up it should fix it,
you can buy a proper set up tool for it if you want or you can do it by trial and error.

Title: Re: can't select reverse
Post by: lemski on 03 June 2011, 20:51

As above. Trial and error works okay. If u put it in 5th on selector and gearbox and tighten it. It should be pretty damn close

Title: Re: can't select reverse
Post by: hennoir on 04 June 2011, 15:49

Just to hijack this thread and add something, I have just been and adjusted the selector rod, just needed a couple of 13mm ring spanners and about 10-15mins.......quite easy, even having never adjusted selector before.
hopefully will help others too