GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: spudboy6 on 25 May 2011, 13:34
-
so my codes are
00525 -G39 - 02 sensor , i know to change the lamba on this
00519- intake manifold pressure sensor -G71 signal too low ? what do i do
00625- vehicle speed sensor signal not plausable ? what do i do
00588- airbag igniter drivers side N95 ressistance too high
im mainly worried about this speed signal sensor and manifold pressure sensopr , if anyone could help me please i would be ever so thankfull ,
-
MAP sensor is with the ECU, there's a piece of vacuum pipe going to it that perishes and leaks. Have a check see if there's a leak.
-
MAP sensor is with the ECU, there's a piece of vacuum pipe going to it that perishes and leaks. Have a check see if there's a leak.
Do these vaccum pipes actually join to the ecu ? And is map sensor on the 1.4 AEX on the drivers side if the manifold with a 4wire plug ?
Thanks
-
AEX is on the manifold, its a small things that bolts directly to it, i think it is 4 pin from memory, not many other 4 pin things bolted to the manifold anyway :grin: