GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: scott_GT on 24 May 2011, 19:50

Title: Gear Linkage
Post by: scott_GT on 24 May 2011, 19:50

(http://i265.photobucket.com/albums/ii211/Paul86S2/711240.png)


On this picture my number 49 has snapped as the bolt was loose so i tightend it up, and must have over done it. How do i disconect it from number 33, It must be possible as you can buy that part.

Title: Re: Gear Linkage
Post by: Vdub-Dj on 25 May 2011, 02:14

Is this the bracket with the plastic bush in it which holds the selector rod?

Title: Re: Gear Linkage
Post by: dashey on 25 May 2011, 02:24

Lift the little plastic tab up and slide it off

Title: Re: Gear Linkage
Post by: dashey on 25 May 2011, 02:37

And then get a flat head slide it inbetween the plastic and the metal and it should come out il take pictures if you need

Title: Re: Gear Linkage
Post by: scott_GT on 25 May 2011, 23:33

If you wouldn't mind mate, pics would be helpfull  :smiley:

Title: Re: Gear Linkage
Post by: dashey on 26 May 2011, 18:28

how to disconnect the gear linkage (cable) (http://i1118.photobucket.com/albums/k617/stevedashey/081f56c6.jpg)
 lift the black plastic tab up and slide the cable away (http://i1118.photobucket.com/albums/k617/stevedashey/2ea0075d.jpg)
 push the cable away then get a flat head screwdriver (http://i1118.photobucket.com/albums/k617/stevedashey/db0462ea.jpg)
 slide the screwdriver in between the platic and the metal then simple twist the pull it out (http://i1118.photobucket.com/albums/k617/stevedashey/c5e8ccf1.jpg)
 then hey presto its out (http://i1118.photobucket.com/albums/k617/stevedashey/d8b2a273.jpg)