GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Dave_IOW on 23 May 2011, 17:27

Title: Eibach front arb owners 25mm
Post by: Dave_IOW on 23 May 2011, 17:27

How low are you roughly (pics would help) and does it rub? Mine is pretty bad at the min after taking TT arb off and im not happy.

Thought the eibach 25mm one had bigger hoops to stop this?

My droplinks are cut down and wound in as far as you can go, so cant go any further on that.

Title: Re: Eibach front arb owners 25mm
Post by: Dave_IOW on 28 May 2011, 17:10

:huh:   anyone else using the Eibach 25mm job?

Title: Re: Eibach front arb owners 25mm
Post by: topher on 28 May 2011, 17:22

is it definitely an Eibach one and not JOM? They look very similar but the JOM ones give no more clearance than a standard arb.

Title: Re: Eibach front arb owners 25mm
Post by: Dave_IOW on 28 May 2011, 19:50

yeah definately eibach, however its for seat leon (not LCR) but 99% sure this is the same.

however realised ive had a stupid moment with droplinks  :rolleyes:

Title: Re: Eibach front arb owners 25mm
Post by: bobbarley on 28 May 2011, 19:54

My front ARB is absolutely fine.

Title: Re: Eibach front arb owners 25mm
Post by: Dave_IOW on 28 May 2011, 20:06

how much you cut off your droplinks bob?

Think im going to have to angle grind about 25mm off mine overall and the threaded section, after taking the nut off and wound them in.

Title: Re: Eibach front arb owners 25mm
Post by: bobbarley on 28 May 2011, 20:08

Nothing, it's all standard apart from the ARB and I changed the bushes as well.  Lowered on Eibach Pro springs.

Title: Re: Eibach front arb owners 25mm
Post by: Dave_IOW on 28 May 2011, 20:11

thats where my problem lies, mines decked.

need to cut some off the thread and link itself, only need about inch and a half from wishbone to ARB..