GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: tallpaulr on 14 May 2011, 21:18
-
Interesting thing has come up with my bora just recently. When starting from cold it sounds really noisey like it's building boost up or something then after a minute or two at idle it sounds like it's dumping off then goes quiet. Then this evening i'm sat at tickover and it does it again but for a few seconds. I fitted a 57i kit a while ago but it never did this up until a few weeks ago. Should I be worried?
-
AUM/AUQ engine code?
Check this out http://uk-mkivs.net/forums/t/141240.aspx :wink:
-
Where would I find the engine code, I've not had her long.
-
Where would I find the engine code, I've not had her long.
Bottom of this thread http://www.golfgtiforum.co.uk/index.php?topic=89491.0
The secondary air pump repair is an easy job to do ive done one :smiley:
-
It's AUM, so it looks like this could be the problem.
-
It's AUM, so it looks like this could be the problem.
Let us know how you get on :smiley:
-
Mine is noisy.
Will have to look at sorting it sometime.
-
Mine is noisy.
Will have to look at sorting it sometime.
Its really easy and well worth doing bud :smiley:
-
Did mine on my AUQ Golf GTi... Made a difference and made it run better when cold also...
-
What causes the pump to go noisy?
-
What causes the pump to go noisy?
The rivets that seal it together go soft, then the pump splits allowing the air to escape when the pump runs which is the noise. Sounds like a diesel!! Replace the rivets with nuts and bolts as shown in the thread and resealed and all quiet again!!
-
Mine is noisy, but it doesn't give me a deisel sound. More like a loud whine sound.
-
Mine is noisy, but it doesn't give me a deisel sound. More like a loud whine sound.
Depends how far gone it is... They vary in noise.
-
Well when I can, I ought to take a look. I need to do my door modules first. At the moment, my car permanantly thinks my door is open.
-
What causes the pump to go noisy?
As dubcruiser says :smiley: Check out the link i posted there are pics in the thread :smiley:
-
Well just done the pump, 5 out of 6 rivets had led go! Just need to wait until she's cold enough for it to kick in.
Thanks loads for the help!
Tall