GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: Furiokid on 14 May 2011, 20:59
-
Just wondered if anyone can help.
Fitted some Jamex coilovers to my gti a while ago and noticed that when on the ground the top mounts are quite high from the turret due to sitting on the nut on the top of the coilover, and then when raised it obviously drops down but if you pull the top of the wheel you can see the top mount moves in the turret.
Has anyone had this??
-
could be worn mounts, did you replace the mounts and bearings when fitting coilies? its kind of a must if not
-
no just fitted the originals, but as i say its the way the mounts sit on the nuts on the top on the coilover, surely when hard cornering this would result in the mount being able to move instead of being tight in the turret :huh:
-
spring then plate then nut then bearing then mount then in turret then nut to tighten up yea?
-
hmmm, i'm trying to remember as i fitted these a while back, think the nuits is on top of the mount possibly, would have to check again
-
you should have shock and spring together held by a top plate held down by a nut tightened, then the bearing goes on, top mount over the top of that, then place in turret, tighten in bay with last nut, this should allow for the mount not to move, i drop the car down and re tighten the top nut up as the weight of the car helps, if you have movement still your mounts are worn
-
cheers mate, i'll have a look this week hopefully :grin:
-
Sounds like you need new top mouts
-
i need some i tried to be cheap so next week im investing lol
-
get genuine mate and bearings
-
just done mine today
should look like this
(http://i655.photobucket.com/albums/uu275/markpug/DSC_0404.jpg)
this is the f**ked 1
(http://i655.photobucket.com/albums/uu275/markpug/DSC_0395.jpg)
-
i need to do my top mounts as the outer rubbers are f**ked, is this just a case of unbolting the top bolt and replacing the top mount? also how much are they a pair? cheers mick
-
mine looks like the second ones lol where did you get yours from mate
cheers
-
is the first pic with car still jacked up? as looks like its not tight, shouldnt sit like that mate, more like the second pic
-
first pic its the new 1 done and second 1 is the f**ked 1 i got them from eurocarparts 30 for the set
-
dont look rite to me mate
-
my looks like pic no.1 when jacked up obviously, but when on the floor looks like pic no.2
-
then they f**ked mate