GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: lockey on 12 May 2011, 23:37

Title: petrol tank retaining ring how to remove
Post by: lockey on 12 May 2011, 23:37
Doin a tdi into gti conversion was hopin to just swap over tank units rather than tank but when i tried to put the tdi unit into the gti tank it wont sit properly because the black retainer ring that held the fuel pump in isnt letting it sit down. Can this be removed or do i have to swap tanks
Title: Re: petrol tank retaining ring how to remove
Post by: dom on 12 May 2011, 23:39
Doin a tdi into gti conversion was hopin to just swap over tank units rather than tank but when i tried to put the tdi unit into the gti tank it wont sit properly because the black retainer ring that held the fuel pump in isnt letting it sit down. Can this be removed or do i have to swap tanks

At a guess i'd say your probably better swapping the tanks over :undecided:
Title: Re: petrol tank retaining ring how to remove
Post by: thai-wronghorse on 12 May 2011, 23:42
If I remember rightly the tank is larger on the derv.
Title: Re: petrol tank retaining ring how to remove
Post by: lockey on 12 May 2011, 23:47
 :sick: is there much to swappin tanks or just undo the two straps and diesel and gti are same depth anyway
Title: Re: petrol tank retaining ring how to remove
Post by: Wayne on 12 May 2011, 23:48
Should be easy to swap over, straps should be the same unless the tank is larger.