GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: brianpologti on 12 May 2011, 19:29

Title: Forge actuator set up.
Post by: brianpologti on 12 May 2011, 19:29

Basically my standard one is week ,i ve ordered a new one with a yellow spring for my hybrid , but i am unsure how to set it up, i am sure i ve seen a post with a little pic on how too , but i ve tried seaching for it but cant find it ,

Title: Re: Forge actuator set up.
Post by: vwfiend on 12 May 2011, 19:41

Ive got a Red spring on my normal ko3s bud. Is the Yellow gonna be any good?

Title: Re: Forge actuator set up.
Post by: Dave_IOW on 12 May 2011, 20:19

id go red mate, 18psi+, think yellow is 9-12psi and blue 13-17psi!

Title: Re: Forge actuator set up.
Post by: RTechUK on 12 May 2011, 21:41

spring all depends on n75dc% mapping, get it wrong and slow low speed high gear spooling could easy see 28+psi.

Today I have been doing a ARZ k03/4 hybrid and just fitted a yellow spring with arounf 6 full turns of pre load, is spikes to 24psi and holds 20/21psi all the way up the rpm range just on spring pressure alone without any piping to the actuator.

Nick

Title: Re: Forge actuator set up.
Post by: brianpologti on 13 May 2011, 13:54

Ok cool