GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: allycat on 11 May 2011, 21:44

Title: New Member 97 Golf gti 16v
Post by: allycat on 11 May 2011, 21:44

Hi All

I am new to the forum and hope that i am not asking a question that has been asked many times before. I am actuall after a pdf diagram of the front and rear suspension for my golf as i want to replace all the bushes.
The car has done 208kms and i am sarting to here a clunking sound going slowly over rigid surfaces aswell as when i press and let go of the accelerator so not sure if it could be the rear engine mount.
Any help will be appreaciated.

Cheers :smiley:

Title: Re: New Member 97 Golf gti 16v
Post by: trog_nfs on 11 May 2011, 21:55

hi, welcome to the forum.

By a pdf of the suspension, do you want an exploded diagram? If so, best bet is either vagcat, which you will have to register for, or wagenstad
http://www.wagenstad.com/

Title: Re: New Member 97 Golf gti 16v
Post by: Dan_GTi8v on 11 May 2011, 23:11

Rear
(http://www.wagenstad.com/diagrams/go-1997-1998/5-511-10.gif)

Theres 2 different front diagrams but I think this is the 16v one
(http://www.wagenstad.com/diagrams/go-1997-1998/4-407-15.gif)

Title: Re: New Member 97 Golf gti 16v
Post by: Wayne on 11 May 2011, 23:51

Welcome to the forum.

8v & 16v are the same susp. early cars have smaller front springs however.

Title: Re: New Member 97 Golf gti 16v
Post by: allycat on 12 May 2011, 02:35

Thanks Guys, most helpful.  :smiley: