GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Golf mk4 TDI => Topic started by: sveed1.8T on 07 May 2011, 22:33

Title: 115PD GTTDI hub size
Post by: sveed1.8T on 07 May 2011, 22:33

I've got a 115PD and i wanted to do the 312mm brake mod.
I knew that i would need to use the complete calliper as the 115PD has smaller front brakes to the 130/150 and the 1.8T.
I drop the car off at the garage and get a phone call a short while later stating that the hubs are too small :angry:

Am i right in saying that i would need to take the front hubs off of a 130/150 or 1.8T to achieve this brake upgrade?

Title: Re: 115PD GTTDI hub size
Post by: richw911 on 07 May 2011, 22:35

Yep.

TBH all the info is here http://www.golfgtiforum.co.uk/index.php?topic=87778.0 and has been for years  :smiley:

Title: Re: 115PD GTTDI hub size
Post by: sveed1.8T on 08 May 2011, 00:10

Quote from: richw911 on 07 May 2011, 22:35

Yep.

TBH all the info is here http://www.golfgtiforum.co.uk/index.php?topic=87778.0 and has been for years  :smiley:

Yeh, cheers, it was because of reading this thread in the past that made me decide to purchase 312mm brakes! :grin: :grin:
That was when they were going to go straight onto my 1.8T.

Thanks for confirming that i need to replace the hubs though; as i didn't want to fork out for some and find out i had the wrong ones etc etc :smiley: