GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: trog_nfs on 25 April 2011, 12:36

Title: rclick and total closure
Post by: trog_nfs on 25 April 2011, 12:36

Hi chaps,

I've just spent the morning putting in the rclick central locking kit, and it all works apart from total closure? The wiring diagram they supplied suggested no additional wires other than those that connect to the grey and green wires in the door loom needed connecting to get it to work.
If I put the key in the door it works perfectly, but not if I use the fob.

Any ideas?

Cheers

Title: Re: rclick and total closure
Post by: Beenie on 25 April 2011, 13:17

I think it needs to be connected into the central locking loom on the car side of the door loom plug if that makes sense?

I've still not connected mine up for this reason lol

Title: Re: rclick and total closure
Post by: dubvrs on 25 April 2011, 23:00

Not got one but sure it has to be setup somehow.

All the module does is give out a lock output for 20 seconds to close the windows and sunroof as thats all my cobra alarm did.

Is there any dip switch's that need setting as there was on the rclick unit i put on my mk2.

Title: Re: rclick and total closure
Post by: trog_nfs on 26 April 2011, 09:23

dip switches? You'll have to elaborate chap.

I'd found some stuff on net about the 20s pulse, but don't really know how this would work with the KE99-ULT kit, as there's nowt in the instructions about it.

The only part I could see was there is a switchable 1 or 2 pulse mode changed via a jumper, which I couldn't find inside the control module.

Title: Re: rclick and total closure
Post by: MK3 Menace on 26 April 2011, 10:02

Trog,

My car came with remote clock and total closure.

I can drive the Golf to work one day this week (I work at RSPB Sandy) and you can have a look over it if that is any help?

Dan

Title: Re: rclick and total closure
Post by: trog_nfs on 26 April 2011, 10:54

Quote from: MK3 Menace on 26 April 2011, 10:02

Trog,

My car came with remote clock and total closure.

I can drive the Golf to work one day this week (I work at RSPB Sandy) and you can have a look over it if that is any help?

Dan

That would be awesome dude! Thats only a few minutes away. I'm lucky enough to have booked weds and thurs this week so I can do either day.

Title: Re: rclick and total closure
Post by: MK3 Menace on 26 April 2011, 11:02

Ok lets say Thursday as the Mrs is taking the car tomorrow to work.

PM me your details and we can get it sorted.

Dan

Title: Re: rclick and total closure
Post by: trog_nfs on 26 April 2011, 21:39

Hopefully I will get this sorted, as I recieved a reply from Rclick about the issue:

"Hi,

the windows close when you press lock on the remote.

Thanks,"

Very helpful  :angry:

If  I work it out, I'll let everyone know.

Title: Re: rclick and total closure
Post by: rubjonny on 27 April 2011, 10:18

try holding the lock button down for a few seconds? i never managed to get it to work with my corrado 1 touch loom though :(

Title: Re: rclick and total closure
Post by: trog_nfs on 27 April 2011, 12:52

I managed to sort it in the end. Bit of wiring required, but easy enough.

I'll put a guide up in the maintainence bit later for everyone else.

Title: Re: rclick and total closure
Post by: Elios_l on 03 May 2014, 15:35

Alrighty. I know this is an old post but wondering if you cloud elaborate on how you got the total closure to work in the end? I got an rclick system have wired most bits up except for the total closure and the posotive and negative door triggers.
With the total closure i have one green wire which i have no idea where to link up to. My system also came with a relay. any help would be great!

Title: Re: rclick and total closure
Post by: Elios_l on 06 May 2014, 01:15

I am having the same problem with my rclick alarm. I got the AL699 kit and it has a wire for the total closure (dark green) how did you end up getting it to work. any help would be very much appreciated!