GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: wurth on 21 April 2011, 21:02

Title: 2.0 driver ????
Post by: wurth on 21 April 2011, 21:02

Is it possible to swap a golf driver 1.6 driver to 9a ?

Ive currently got a 1.6 driver, with weber, PB head, and performance exhaust.


Ive also got a clean 9A bottom end ;), thing im wondering is if i up jet the weber accordingly, can i wip the 9a on, and swap all the driver bits over ?

Title: Re: 2.0 driver ????
Post by: Wayne on 21 April 2011, 22:47

Yes and the weber carb should cope all ok.

When I worked for TSR we built a lot of 1.9 or 2.0 engines with the weber carb.

Title: Re: 2.0 driver ????
Post by: Diamond Hell on 21 April 2011, 22:56

and you still don't know Weber is spelt with a single b  :rolleyes:

Title: Re: 2.0 driver ????
Post by: wurth on 22 April 2011, 10:03

Quote from: Wayne on 21 April 2011, 22:47

Yes and the weber carb should cope all ok.

When I worked for TSR we built a lot of 1.9 or 2.0 engines with the weber carb.

Was that the 1.8 carb/jets ?  and you used the 9a or similar mk3 2.0 bottom end ?

Title: Re: 2.0 driver ????
Post by: danny_p on 22 April 2011, 11:24

dosen't really matter what carb you put on it as  it won't exactly work very well


9A is a 16v block  the 8v GTI head will fit just won't work k

Title: Re: 2.0 driver ????
Post by: wurth on 22 April 2011, 13:42

Sorry, my bad. Meant 2E.