GolfGTIforum.co.uk

General => The garage => Topic started by: mc91 on 23 March 2011, 15:29

Title: Mk4 1.8Gti Stage 2
Post by: mc91 on 23 March 2011, 15:29

Hi guys what is needed for the car in order to have a stage 2 remap done?

Title: Re: Mk4 1.8Gti Stage 2
Post by: Hulmie on 23 March 2011, 17:52

not sure if its a plastic pig  :laugh:

helps if you say for what car, we dont all have crystal balls

Title: Re: Mk4 1.8Gti Stage 2
Post by: mc91 on 24 March 2011, 07:51

Sorry totally fogot about that bit, it will be a mk4 1.8gti 20v golf newer than 2000.

Title: Re: Mk4 1.8Gti Stage 2
Post by: Hulmie on 24 March 2011, 08:32

for a good stage2 your looking at the following

Pipercross Panel Filter
good cat back exhaust system, most go milltek
Forge Silicone Turbo intake pipe
Forge 007p re-circ valve
Remap
Good service - Oil, Coolant, Filters, Spark Plugs

Optional

3 inch downpipe and sports cat/De-cat
Forge Silicone Boost Hoses
Cambelt Kit & Water Pump & Aux belt change if old.

Title: Re: Mk4 1.8Gti Stage 2
Post by: mc91 on 24 March 2011, 08:47

Cheers pal, And what sort of bhp and torque would it make?

Title: Re: Mk4 1.8Gti Stage 2
Post by: Hulmie on 24 March 2011, 11:37

Depedning on who maps the car. You can look for around 220-230bhp & 230-250 lb/ft torque. also depends on the health of the engine & turbo.

I would recommend R-Tech for maps, probs best in the country