GolfGTIforum.co.uk

General => Detailing => Topic started by: jmsheahan on 20 March 2011, 17:43

Title: Hand applied cutting compound
Post by: jmsheahan on 20 March 2011, 17:43
Hi all,

After a little advice. It's coming up to that time of year again when the mk2 gets it's annual polish  :grin:

My paint is quite faded again and covered in swirl marks. Is there anything on the market I can get good results with by hand polishing? I'm too scared to use a machine polisher as the paint is quite thin in places plus I can't afford one! Just after something with a mild cutting compound that can be hand applied.

Usual concoction is AG Super resin, couple of coats of Clearkote red moose, 2 coats of Poorboys EX-P Sealant, followed by 2 coats of Collinite 476.

Car is Tornado red.

Cheers  :smiley:
Title: Re: Hand applied cutting compound
Post by: tech1889 on 20 March 2011, 18:44
what about some dod juice lime prime which is a very fine compound ??.. SRP is good but as ive been told before it just covers problems doesnt solve them
Title: Re: Hand applied cutting compound
Post by: jmsheahan on 21 March 2011, 15:45
what about some dod juice lime prime which is a very fine compound ??.. SRP is good but as ive been told before it just covers problems doesnt solve them

Is that a sort of paint cleaner?
Title: Re: Hand applied cutting compound
Post by: tech1889 on 21 March 2011, 16:23
The dodo stuff is a very light compound
Title: Re: Hand applied cutting compound
Post by: Dan J on 21 March 2011, 17:22
yes lime prime is a cleanser with a bit of cut but the cut will be un-noticable if using it by hand.

i used these today on a bmw saloon by hand and they worked very well http://www.i4detailing.co.uk/acatalog/Britemax_pure_cut_1.html
http://www.i4detailing.co.uk/acatalog/britemax_resto_max_1.html

for your red mk2 id suggest resto max. its all in the technique with hand polishing, be warned though your arm will be like a lump of wood when your finished.
Title: Re: Hand applied cutting compound
Post by: jmsheahan on 21 March 2011, 20:36
Cheers PH, the resto max looks good, reasonable price as well. Relatively easy to use that's not too abrasive? I have visions of me burning through the paint with it  :grin:
Title: Re: Hand applied cutting compound
Post by: Dan J on 21 March 2011, 21:09
lol no you wont burn through the paint by hand polishing with this, obviously be carefull on the top edge of the wings etc as the paint will be thinnest around these areas,
just rub in small circular motions overlapping, think of your hand as the head on a DA machine;)
work in small areas again overlapping each area.
resto max has just the right amount of cut to be effective when used by hand.
Title: Re: Hand applied cutting compound
Post by: tech1889 on 21 March 2011, 21:23
and i expect you to do 600rpm by hand  :laugh:
Title: Re: Hand applied cutting compound
Post by: jmsheahan on 21 March 2011, 22:07
 :grin:

Cheers for the advice guys.
Title: Re: Hand applied cutting compound
Post by: tech1889 on 21 March 2011, 22:14
If you can mate get a silverline polisher they only £40 thats what i was gona get till i saved up for a dodo juice one.. will save you so much time in the long run
Title: Re: Hand applied cutting compound
Post by: Dan J on 22 March 2011, 17:16
If you can mate get a silverline polisher they only £40 thats what i was gona get till i saved up for a dodo juice one.. will save you so much time in the long run

id strongly recomend not putting a rotory to it because the paint is uber thin on these unless its had a respray so a rotory in in-experienced hands will cause damage.
Title: Re: Hand applied cutting compound
Post by: jmsheahan on 22 March 2011, 23:23
Can't afford a machine polisher to be honest and like I say, I'm scared of them  :grin:

Going to give the resto max a go and build up some arm muscles! Have noticed these two as well though - any good?

http://www.cleanyourcar.co.uk/polishing/polish/sonus-hand-polish-bundle/prod_29.html

http://www.cleanyourcar.co.uk/polishing/polish/car-lack-68-hand-polish-kit/prod_359.html
Title: Re: Hand applied cutting compound
Post by: Dan J on 23 March 2011, 00:50
no the sonus ones arent very good tbh and the carlack kit is paste so will be very hard work as in regards to breaking the polish down and will also create a fair amount of dust, not saying its rubbish but paste polishes are harder to work with than liquid polishes and are messy;).

restomax all the way
Title: Re: Hand applied cutting compound
Post by: Buck on 24 March 2011, 22:33
gtechniq P1 is very good by hand - check out this You Tube Vid.

http://www.youtube.com/watch?v=_u-QTCbOUW4

Title: Re: Hand applied cutting compound
Post by: jmsheahan on 25 March 2011, 13:33
Gone for the restomax, cheers for the advice. Will let you know how I get on.