GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: skcollob_ho on 16 March 2011, 23:22

Title: Anyone with ETKA that can help please?
Post by: skcollob_ho on 16 March 2011, 23:22

I posted this in the derv section, but no answers. I hope someone can help!

I am in the process of replacing the clips and o-rings on all the boost pipes on my pd150, but the only diagram I can find is for the pd130. Does anyone know/can confirm the part numbers for the clips and o-rings for the pipes to/from the FMIC please?

On the pd130 diagram, the part number for the o-ring is 1J0 145 117 A, which I am 90% sure is the same for the pd150, but the clip is not shown on the diagram, and I know there are clips for the pipes going to/from the FMIC.

Any help much appreciated.

Michael

Title: Re: Anyone with ETKA that can help please?
Post by: old_n07 on 17 March 2011, 07:26

The diagram is for the SMIC but look at the engine codes for the part numbers :afro:

(http://i65.photobucket.com/albums/h208/old_n07/screendumps/boost%20pipes/IC1.png)

(http://i65.photobucket.com/albums/h208/old_n07/screendumps/boost%20pipes/IC2.png)