GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Nathan.golf on 13 March 2011, 14:05

Title: Coilover help
Post by: Nathan.golf on 13 March 2011, 14:05
Fitted coilovers with adjustable droplinks, no matter where I set the droplinks ther arb is rubbing the driveshaft.
Help please
Title: Re: Coiove help
Post by: GunnerCP on 13 March 2011, 14:10
how low have you wound the coilovers down????
Title: Re: Coiove help
Post by: Nathan.golf on 13 March 2011, 14:13
Bout 40
Title: Re: Coiove help
Post by: Nathan.golf on 13 March 2011, 14:15
Fitted coilovers with adjustable droplinks, no matter where I set the droplinks ther arb is rubbing the driveshaft.
Help please

This is only rubbing on drivers side
Title: Re: Coilover help
Post by: b1gdub on 13 March 2011, 17:57
because the drivers's side driveshaft is thicker. I'm lowered 55mm and overcame this problem by fitting an R32 anti roll bar.
Title: Re: Coilover help
Post by: andc1 on 13 March 2011, 18:52
drop links really dont do alot to be honest, take arb out or upgrade to one that goes underneath, r32, slcr, audi tt etc
Title: Re: Coilover help
Post by: vwdan80 on 13 March 2011, 19:27
Hi if you cut the adjustable link arms down a bit  to make them shorter then they will not rub any more! hope this helps  :smiley:
Title: Re: Coilover help
Post by: jonnyturbo on 13 March 2011, 19:28
yep i got a eibach one lol and adjustable drop links lol solved my prob lol :evil: that is when i eventually go low enough
Title: Re: Coilover help
Post by: golf-sib on 13 March 2011, 19:52
Hi if you cut the adjustable link arms down a bit  to make them shorter then they will not rub any more! hope this helps  :smiley:

+1

You want the drop links to be shorter, otherwise a R32 ARB would solve the problem as well. Get both links off and cut them down so you have just over an inch of thread and the same for the tapped end, this way it will be still strong and short enough to allow the ARB not to rub.
Title: Re: Coilover help
Post by: Nathan.golf on 14 March 2011, 13:06
I have just purchased a new arb to do the job, cheers for help on this 1