GolfGTIforum.co.uk

Model specific boards => Golf mk1 => Topic started by: lord14 on 11 March 2011, 16:46

Title: 1.3 servo and mc
Post by: lord14 on 11 March 2011, 16:46

i want to upgrade to the 9inch servo , but im not sure on the master cylinder as the mk2 gti one has only 2 outlets , can i re use my standard master cylinder on the 9inch servo #/

Title: Re: 1.3 servo and mc
Post by: raferackstraw on 11 March 2011, 19:38

no i dont think so, you need the 22mm master cylinder and just use the 2 outlets, use 1 outlet per diagonally split circuit and run 1 pipe from each outlet and use t pieces to join your existing pipes

Title: Re: 1.3 servo and mc
Post by: lord14 on 12 March 2011, 00:51

this is the thing im not sure about , where do i get t pieces from ?, and which lines go on whihc one , cheers

Title: Re: 1.3 servo and mc
Post by: rubjonny on 14 March 2011, 11:12

MK2 or MK3 Golf for the T pieces, but if you buy new master cylinders generally they have 4 holes anyway. however your MC probably has 6 holes, as you have 2 pressure sensors in it as well as 4 brake lines. if so,again use T pieces. will just have to make up a couple short lengths of copper brake line