GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Golf mk3 gallery => Topic started by: TORNADO-GTi on 28 February 2011, 21:37
-
I bought my 1992 mk3 GTi (134,000 MILES) about a month ago for £490 with the plan to restore it to as close to new as possible on a budget.
(http://i171.photobucket.com/albums/u297/L13BUG/GTi023-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GTi025.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GTi021.jpg)
-
bought a rough old set of vr6 BBS alloys and refurbed them
(http://i171.photobucket.com/albums/u297/L13BUG/BBSWHEELS020.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/BBSWHEELS019.jpg)
-
changed oil, filters and front bumper this weekend and added yellow fogs just got to wire them up as the loom only arrived today. also got to fit new aerial as it has been snapped off at some point in its life and new front carpet to replace original which has a hole in it near the clutch pedal. i have also ordered some colour coded mirrors. i'm going to do a full respray when the weather gets a bit warmer.
(http://i171.photobucket.com/albums/u297/L13BUG/gordan005.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan002.jpg)
-
looks nice and clean
-
a few pics of my former VAGs
my current daily driver TT Roadster (http://i171.photobucket.com/albums/u297/L13BUG/abtbadge008.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/anisyellowleather015.jpg)
my Beetle that i sold for the TT
(http://i171.photobucket.com/albums/u297/L13BUG/100_2193.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/100_2209.jpg)
my mk4 Polo which i sold for the Beetle
(http://i171.photobucket.com/albums/u297/L13BUG/sofie.jpg)
-
:undecided: are you aiming for a standard or modified car :smiley:
-
TT looks nice, others are a bit marmite IMO.
Mk3 looks clean, not sure on the yellow fogs if your going for original but will be interesting to see how it comes out :)
-
Yeah, not sure about what you mean by standard. Those BBS weren't standard on anything other than a VR6.
-
Yeah, not sure about what you mean by standard. Those BBS weren't standard on anything other than a VR6.
And only the later ones, 1996 onwards I believe, early ones had different BBS alloys.
-
Looks like a clean example, in the best colour and a good choice of wheels :grin:
-
Looks a very clean motor nice to see another 3 door aswell good colour choice to :wink:
-
almost as clean as mine :wink:
red golfs seem to be every where at moment
-
Nice car... wheels look lovely btw
what colour will the respray bE?
-
Got the tyres on the bbs wheels and fitted them :smiley:
(http://i171.photobucket.com/albums/u297/L13BUG/BBSWHEELSon011.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/BBSWHEELSon008.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/BBSWHEELSon007.jpg)
-
Nice car... wheels look lovely btw
what colour will the respray bE?
just going to respray in original colour
-
Looks a beaut!
-
Looks very tidy mate what is making you respray it?
Oh and whereabouts in Lincs are you?
Check this out http://bombercountydubs.makeforum.co.uk/ :cool:
-
Looks really clean with the BBS on now but in need of lowering big time :wink:
-
Looks really good, reminds me of mine :grin:
(http://i790.photobucket.com/albums/yy183/codling1234/111_0513.jpg)
(http://i790.photobucket.com/albums/yy183/codling1234/111_0529.jpg)
-
Love this colour. :cool:
-
Looks very tidy mate what is making you respray it?
Oh and whereabouts in Lincs are you?
Check this out http://bombercountydubs.makeforum.co.uk/ :cool:
The lacquer on the roof is peeling really badly and has a couple of rust spots so thought i might as well get it all done. im in Louth
-
Looks really good, reminds me of mine :grin:
:grin:
-
Painted the brake calipers yesterday as they were a little on the rusty side!
(http://i171.photobucket.com/albums/u297/L13BUG/gordan008.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan007.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan006.jpg)
-
Colour coded mirrors and boot plinth fitted tonight and i just won a full biege leather interior for £175 :smiley:
(http://i171.photobucket.com/albums/u297/L13BUG/gordan003.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan002-1.jpg)
cant wait to pick it alll up :smiley:
(http://i171.photobucket.com/albums/u297/L13BUG/KGrHqYOKosE10Dv6ZBNkhLEwIWw_12.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/KGrHqYOKi4E2MyLQRL1BNkhKJUWH_12.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/KGrHqIOKiwE12VoPCZHBNkhJUcmMw_12.jpg)
-
Thats a steal!
going to look lovely tucked up inside your car .
-
yeah i thought so as long as its in as good nick as they say. think i will stick with my black carpet and centre console for a bit of contrast.
-
The leathers will look really nice first time ive seen that colour trim in a red golf :wink:
-
The new seats and front carpet are in, i didnt realise how easy they would be to fit :smiley:
front carpet and seats removed
(http://i171.photobucket.com/albums/u297/L13BUG/golfseats016.jpg)
new front carpet in
(http://i171.photobucket.com/albums/u297/L13BUG/golfseats017.jpg)
new interior
(http://i171.photobucket.com/albums/u297/L13BUG/golfseats027.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/golfseats026.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/golfseats022.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/golfseats020.jpg)
-
as if u live in louth, never seen this floating about. see low life dubber has beat me to the join the local forum sentance. good work i like the interier
liam
-
cheers, i am in louth just dont drive it that much as my TT is my main car.
(http://i171.photobucket.com/albums/u297/L13BUG/tt2011032.jpg)
-
dont think av seen that either, i must go looking round louth more.
-
Looks good. good find with the leathers... never seen that colour either in a red one... bit different,
-
Looks good. good find with the leathers... never seen that colour either in a red one... bit different,
Don't think it is factory, I believe beige was only available with dragon green new.
-
Looks good. good find with the leathers... never seen that colour either in a red one... bit different,
Don't think it is factory, I believe beige was only available with dragon green new.
Twilight Violet aswell. :)
-
Looking lush
where did you get the vw floor matts from??
-
Looking lush
where did you get the vw floor matts from??
Thanks, i got the mats off ebay think they were about twenty quid.
-
Looking lush
where did you get the vw floor matts from??
Thanks, i got the mats off ebay think they were about twenty quid.
they look good, dont think il need matts in when i chuck the carpets out tho :shocked:
-
(http://i171.photobucket.com/albums/u297/L13BUG/newwindscreen015.jpg)
-
That's some serious car cover you've got on the TT there.
-
thought i would give the old girl a polish while the sun was out a couple of weeks back
(http://i171.photobucket.com/albums/u297/L13BUG/gordanshiny051.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordanshiny048.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordanshiny046.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordanshiny044.jpg)
-
ooooo, shiny, looks mint.
-
i still haven't got round to stripping it down to respray yet, the peeling roof lacquer really lets it down :angry:
-
i still haven't got round to stripping it down to respray yet, the peeling roof lacquer really lets it down :angry:
sh*t job, putting it together is worse though, even more so when you lose bits! :lipsrsealed:
-
i usually end up with nuts and bolt left over :grin:
-
i usually end up with nuts and bolt left over :grin:
I lost bits i needed and found bits i didn't! :grin:
-
looks nice mate
-
thanks :smiley:
-
:sad: Started to strip the old girl today and she is a little more rotten than first thought, it needs both front wings replacing and the sills look like the A Team welded them in a barn but it all adds to the challenge :shocked:
(http://i171.photobucket.com/albums/u297/L13BUG/gordan005-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan004.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan003-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan002-2.jpg)
-
A few more pics from today. most of the rust now treated and ordered new wings arch trims & clips.
(http://i171.photobucket.com/albums/u297/L13BUG/gordan008-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan006-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan004-1.jpg)
-
Nice work so far dude! Really like what you have done with the interior :cool: exactly what I would have done! You should definitely loose the sill covers and arch reins and replace the side trims for some cl counter parts once you have resprayed her, they look so much cleaner that way!
-
A few pics from today, cut the rot out of the floor pan and started on the first sand. Also got a set of immaculate side trims from the local scrappy for £12 :smiley:
(http://i171.photobucket.com/albums/u297/L13BUG/gordan034.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan032.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan031.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan030.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan029.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan027.jpg)
-
Looking forward to seeing this progress. Doing a similar resto to my 8 valve.
-
hope you have less rust :smiley:
-
Unfortunately no!! Although i'm getting there. Check out my thread. (At the bottom where my sig is).
-
wow good work, thought i had a lot of work to do , my back arches weren't that bad just surface rust. :cool:
-
well finally everything is welded up, floor, sills & few bits at bottom of rear arches. also found out how flammable the original underseal is :evil:
(http://i171.photobucket.com/albums/u297/L13BUG/gordan016.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan015.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan014.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan009.jpg)
-
Got to the garage last night and the golf's in the spray booth nearly sanded and half masked looks like my grand father in law has been busy :grin: I found some more rot around the fuel filler which needs some new metal, filled the sills and DA'd the bonnet to get rid of all the stone chips.
(http://i171.photobucket.com/albums/u297/L13BUG/gordan006-3.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan005-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan004-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan002-3.jpg)
-
Coming along great man!
-
Thanks, its getting there, can't wait to get some paint on it
-
Nearly ready for paint now :smiley:
(http://i171.photobucket.com/albums/u297/L13BUG/gordan005-3.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan003-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan002-4.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan001.jpg)
-
How long till paint do you reckon?
-
should be getting the undercoat on next weekend.
-
Bet you can't wait! There ain't nothing like a fresh coat of paint!
-
Primer is on and i am nearly done wet and drying it, no low spots on body makes up for all the rust underneath.
(http://i171.photobucket.com/albums/u297/L13BUG/gordan025.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan024.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan023.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan019.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan015-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan013.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan011.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan008-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan005-4.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan004-3.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan003-3.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan002-5.jpg)
-
(http://i171.photobucket.com/albums/u297/L13BUG/gordan016-1.jpg)
-
Rub rub rub
keep it up mate :cool:
-
Looking sweet dude! Have fun cleaning off all that residue! :evil:
-
The body is now red just got bumpers, bonnet, boot, wings, spoiler, door mirrors and boot trim to paint!!!! :shocked:
(http://i171.photobucket.com/albums/u297/L13BUG/gordan045.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan044.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan042.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan040.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan025-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan024-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan017.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan015-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan014-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan013-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan011-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan010.jpg)
-
Looks really good dude! Are you color coding the bumpers and side trim?
-
Looks really good dude! Are you color coding the bumpers and side trim?
No going to leave it standard
-
Looks really good dude! Are you color coding the bumpers and side trim?
No going to leave it standard
Fair play! Can't wait to see it all finished :)
-
Took masking off last night and waxoyl'd the front end
(http://i171.photobucket.com/albums/u297/L13BUG/gordan011-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan010-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan009-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan007-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan006-5.jpg)
-
Most of the trim is back on
(http://i171.photobucket.com/albums/u297/L13BUG/gordan018.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan017-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan014-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan012.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan011-3.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan009-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan008-4.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan006-6.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan005-5.jpg)
-
new spoiler test fitted ready for paint
(http://i171.photobucket.com/albums/u297/L13BUG/gordan006-7.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan007-3.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan011-4.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan012-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan014-3.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan015-4.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan017-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan018-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan023-1.jpg)
-
Interior is back in with nice thick 20mm underlay :grin: and nice shiny front panel fitted
(http://i171.photobucket.com/albums/u297/L13BUG/gordan016-3.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan011-5.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan010-3.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan008-6.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan006-8.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan001-1.jpg)
-
WOW looks incredible!
hope your planning on keeping this, great idea with the waxoil :smug:
-
Looking great dude! How long till It's finished do you think?
-
Thanks lads, after all this work i wouldn't have the heart to ever sell it. I don't know when it will all be finished as i have all the suspension bits to renew and then i think an engine rebuild is probably in order :shocked:
lovin' the vento front end by the way Dan :cool:
-
Looks great :cool: A lot of work but well worth it!
-
Top job, you should be well proud of yourself mate :wink:
-
Fantastic work :cool:
-
Side skirts back on, undersealed inside of front wings ready for paint, sprayed badges black and bought some Hella clear rear lights for 99p :smiley:
(http://i171.photobucket.com/albums/u297/L13BUG/gordon029.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon025.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon020.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon019.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon016.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon014.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon013.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon010.jpg)
-
after all this work i wouldn't of put black badges on, you should of got new shiny ones !
-
Had a bit of a fiddle with the air meter spring :wink:
(http://i171.photobucket.com/albums/u297/L13BUG/gordon009.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon008.jpg)
-
:huh: I dont see it. What did you do?? :undecided:
-
Its the same picture just zoomed in a little, apparently if you turn the dial it runs better something my father in law learnt back in the old days of him having 80s cavaliers
found this too
http://fuelie.tripod.com/performance.htm
-
Bonnet, boot and wings all primed and blocked.
(http://i171.photobucket.com/albums/u297/L13BUG/gordon025-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon020-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon018.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon017.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon016-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon014-1.jpg)
-
just this lot and bumpers left to do
(http://i171.photobucket.com/albums/u297/L13BUG/gordon023.jpg)
-
Polished the top of the intake manifold, tinted clear lights red ,still may not use them though and get some new engine bay stickers
(http://i171.photobucket.com/albums/u297/L13BUG/gordon028.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon027.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon017-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon014-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon011.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon022.jpg)
-
Good work on the manifold. A good few hours spent on that eh!! Where did you get the new stickers from? I definitely need a set of those!!
-
I really need to do that to my inlet, its well oiled up :rolleyes:
What did you use to polish it?
quite like the rear cluster, look forward to seeing it fitted :wink:
-
Some great work mate!I see you in Lincs too.Whereabouts are you living?
-
What did you use to polish it?
I used a 320 grit sanding disc the various wet and dry paper up to a 3000 grit, it could do with being a bit shinier so might get a metal polishing kit.
-
Some great work mate!I see you in Lincs too.Whereabouts are you living?
thanks mate i'm out near Louth
-
Ah nice one.We have a nice little local club for vw's called Bomber County Dubs you should check it out.http://bombercountydubs.makeforum.co.uk/
Look forward to seeing it in the flesh :)
-
Good work on the manifold. A good few hours spent on that eh!! Where did you get the new stickers from? I definitely need a set of those!!
got the stickers off ebay the bloke also has a website but postage is a lot dearer on there
http://www.volkswagenstickers.co.uk/
-
I used that site for some of the stickers i replaced on my last mk2, pretty decent actually.
-
Got a polishing kit to finish the manifold, fitted new rear light, finally found an original airbox and then got bonnet, boot, and wings sprayed
(http://i171.photobucket.com/albums/u297/L13BUG/gordon037.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon036.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon035.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon031.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon028-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon026.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon025-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon022-1.jpg)
-
painted the branches red tonight
(http://i171.photobucket.com/albums/u297/L13BUG/gordon026-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon025-3.jpg)
-
:cool: :cool: Nice work on the polishing, how long did it take to do the intake?
-
:cool: :cool: Nice work on the polishing, how long did it take to do the intake?
thanks mate, it only took a couple of hours
-
:cool: :cool: Nice work on the polishing, how long did it take to do the intake?
thanks mate, it only took a couple of hours
That's not too bad, was considering doing mine when I can't do other things. What kit did you get, did it cost much?
-
i used a drill with a sanding disc to smooth the rough casting then various wet and dry paper from 320 grit to 1200 then got a polishing kit from halfords for £14,99 but they are cheaper on ebay.
-
Looking good mate!!
-
I've got the polishing bug so after work nipped to the local scrap yard and got a new rocker cover, it does need a bit more of a polish as it isn't quite good enough yet.
(http://i171.photobucket.com/albums/u297/L13BUG/gordon008-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon013-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon014-3.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon018-1.jpg)
-
Looks mint mate. Will look even better on the car. Gonna be a really clean Mk3 when its finished!!
-
Bang Tidy. :cool:
-
Good job man :)
-
:cool:
-
finished polishing the rocker cover, then decided to do the air meter as well. then fitted the front wings.
(http://i171.photobucket.com/albums/u297/L13BUG/gordon028-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon027-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon023-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon019-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon014-4.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon009-1.jpg)
-
Bl00dy hell that came up good. :cool:
(http://i171.photobucket.com/albums/u297/L13BUG/gordon008-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon027-1.jpg)
-
Yep! Lovely work :) Makes me want to get out and do mine!
-
Haven't posted any pics of TT for a while so here are couple with the new grille fitted after i hit a pigeon :angry:
(http://i171.photobucket.com/albums/u297/L13BUG/tt041.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/tt037.jpg)
-
took the scuttle cover off and waxoyl'd inside then fitted bonnet, boot and lights. found some front mud flaps and pollen filter housing(as mine just had a grille being an early model) from the local scrap yard.
(http://i171.photobucket.com/albums/u297/L13BUG/gordon012-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon013-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon016-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon040.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon037-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon035-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon034.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon032.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon027-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon026-2.jpg)
-
A few pics from today.
(http://i171.photobucket.com/albums/u297/L13BUG/gordon034-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon033.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon030.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon026-3.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon023-3.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon022-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon021.jpg)
-
It's looking REALLY good man :)
-
Running without bumpers only looks ok on a MK1. :grin:
-
Great work mate..
TT looks V.nice...
Good thinking with the wax oil, under my scuttle panel is mint, but still a good idea!
-
Good progress :afro:
-
Polished the idle control valve and gear link weight, fitted a 7 litre washer bottle (i only had a 4 litre bottle) and wrapped my fog lights in yellow tint.
(http://i171.photobucket.com/albums/u297/L13BUG/gordon027-3.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon029-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon040-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon041.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon047.jpg)
-
Looking great mate :cool:
-
Loving the yellow :cool:
-
Took the head off today and stripped it down ready for new tappets and oil seals, then gave it a spray.
(http://i171.photobucket.com/albums/u297/L13BUG/gordon009-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon012-2.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon019-2.jpg)
-
That block looks proper :cool:
-
Great work.
-
cheers fellas :smiley:
-
Very impressive! How are you painting the numbers etc....? Looks Awsome!
-
Very impressive! How are you painting the numbers etc....? Looks Awsome!
Thanks, i'm using halfords touch up paints with the needle tips to do lettering .
-
That is wicked!!! :cool: :cool:
-
Great work :cool:
-
Great work....your head is definately better than mine :grin:
-
Very impressive! How are you painting the numbers etc....? Looks Awsome!
Thanks, i'm using halfords touch up paints with the needle tips to do lettering .
clever sod :grin:
-
Sprayed the alternator today as it was looking a bit tired
(http://i171.photobucket.com/albums/u297/L13BUG/gordon026-4.jpg)
-
Cleaned up the valves and fitted new oil seals and tappets, then fitted manifolds and injectors.
(http://i171.photobucket.com/albums/u297/L13BUG/gordonengine010.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordonengine016.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordonengine012.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordonengine020.jpg)
-
Looking good..
How do you get the breather off of the cam cover with braking it? :embarassed:
-
Looking good..
How do you get the breather off of the cam cover with braking it? :embarassed:
I just unscrewed it and pulled it off.
-
If your doing it whilst it's in place, remember to fish out the retaining grommet. :smiley:
-
I un-screwed it and gave it a pull and all i heard was crack :embarassed:
oh well will have a detailed inspection (one day)
-
There was a rubber breather hose attached which goes through the hole in the rocker cover.
-
Bought a stainless back box as original is a bit rusty and it cost less than a pair of tail trims :smiley:
refitted the head just got to get the cambelt done now, then oil and coolant and it should be able to move again under it's own power.
(http://i171.photobucket.com/albums/u297/L13BUG/gordan016-4.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan019-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordan020.jpg)
-
Looks awesome....was going to do the same to my cam cover but I have enough on my plate just now lol. Keep it up mate!!
-
Get a new expansion tank! Everyone misses it out with rebuilds, and it makes a massive difference to cleanliness of the whole bay. :cool:
-
Fitted the exhaust which was said to have previously been fitted to a mk3 but i don't think it had, as i had to get the hanger welded in a totally different place. Then finished off the undersealing, painted the gearbox, and suspension.
(http://i171.photobucket.com/albums/u297/L13BUG/gordon002-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon003.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon005.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordon008-2.jpg)
-
Protecting for the future :cool:
-
it's got so much underseal on it should add about 2 seconds to the 0-60! :grin:
-
Well that's the bodywork done just needs machine polishing. just got to fit cam belt and a few suspension parts and it is done :smiley: now got to find a new front bumper for TT after hitting a badger :angry:
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONBODYWORKFINISHED007.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONBODYWORKFINISHED015.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONBODYWORKFINISHED016.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONBODYWORKFINISHED021.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONBODYWORKFINISHED022.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONBODYWORKFINISHED023.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONBODYWORKFINISHED026.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONBODYWORKFINISHED027.jpg)
-
Looks brilliant,
Bet your glad to have it all back together now!
-
Thanks, yeah glad it's back together. Going to swap the red front GTi badge for a chrome one when it finally arrives from Wolfsburg, only been waiting 2 months!
-
2 Months!
Why from Wolfsburg? Couldn't you get one from stealer?
-
ordered front and rear badges from VW Heritage in january they get the parts direct from VW Classic parts in Wolfsburg, I got the rear badge a fortnight ago but still no front :sad:
-
WHOOPS! i managed to damage the paint on the drivers door while machine polishing it :sick: but got the door resprayed and have now fully polished and waxed the bodywork and cleaned the interior. cambelt is now back on just need to fit other belts now and get a new windscreen and it's about there. :smiley:
(http://i171.photobucket.com/albums/u297/L13BUG/gordonnearlyfinished030.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordonnearlyfinished031.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordonnearlyfinished032.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordonnearlyfinished034.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordonnearlyfinished036.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordonnearlyfinished038.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordonnearlyfinished039.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordonnearlyfinished042.jpg)
-
Absolute beauty mate, so jelous. Looks like a brand new car, great work :wink:
-
Looking great mate!
I so badly want a set of those BBS wheels! :angry:
-
Great work mate, its lovely to see mk3s getting the love instead of being broken for parts!
-
Looking Good!
-
Looks like a new car..... You deserve a better camera. :cool:
-
Great work! Think you need to get new door catches though. Some nice chrome, or even just original zinc coated ones rather than painted. Just my opinion though, as said everything you've done is mucho awsomeness......o :undecided:
:grin: :cool:
-
mmmm, this is giving me ideas about mine now...cracking car mate and a credit to you for all the work you've put in to it.. :cool:
-
Looking minted now mate...done a real good job of it. Want to see some outside pics of it!! Hopefully get mine finished up soon!!
P.S. Did you have the engine and box out of this as I notice the box has all been painted. Also that rear beam looks very shiny, did you drop that too?
-
Cheers lads, definately need chrome door strikes i have managed to get 1 so far. i didn't take the engine gearbox or rear beam off just painted in situ. oh and yes i do need a better camera because the one on my blackberry is useless! :grin:
-
I may have a pair of chrome door strikes for sale this week.
-
Just got to have new windscreen in on tuesday, then MOT & tax and its done.
(http://i171.photobucket.com/albums/u297/L13BUG/IMG-20120406-00802.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/IMG-20120406-00806.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/IMG-20120406-00814.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/IMG-20120406-00800.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/IMG-20120406-00813.jpg)
it's been a busy week, got the TT summer wheels ready and did a few laps around Donnington park in a Ferrari 360
(http://i171.photobucket.com/albums/u297/L13BUG/IMG-20120405-00794.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/KTP_0703.jpg)
-
http://www.golfgtiforum.co.uk/index.php?topic=227001.0
-
i decided to do latches in black instead for now mate.
-
(http://i171.photobucket.com/albums/u297/L13BUG/IMG-20120406-00817.jpg)
-
Well done....Looks spot on mate....really mint :shocked:!! What you tint your fogs with?
-
I used yellow tint film off ebay i'll try and find the stuff.
-
here you go dirt cheap i just cut it about an inch too big all around and the heated it up with a hair dryer and stretched it to shape.
http://www.ebay.co.uk/itm/Gold-Yellow-Tail-Fog-Head-Light-Tint-Vinyl-Film-Cover-/180860375090?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2a1c1e5032
-
Ah nice one, added to my watch list as it has to be done....also how did you get your black things so black. Gaitors for the door wiring and roof seal etc. All looks like new!!
-
halfords silicone lubricant spray, i had a tin hanging around so tried it on tyre walls, dash board and all other trim it works a treat.
http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_219033_langId_-1_categoryId_165705
-
Gave it a good wax yesterday while it wasn't raining
(http://i171.photobucket.com/albums/u297/L13BUG/gordonnearlyfinished063.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordonnearlyfinished070.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordonnearlyfinished073.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordonnearlyfinished078.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordonnearlyfinished080.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/gordonnearlyfinished086.jpg)
-
Well it's passed it's MOT after failing on a leaking brake pipe and seized n/s rear caliper. fitted new pipe and managed to free off caliper enough to pass but had to buy a new one as it stuck again on way back from test. It's also got a nice new shiny windscreen and i wired up the stereo, so all that's left to do is to fit and paint the caliper then get it taxed next month and it is back on the road after about 7 months off :smiley:
-
Well it's passed it's MOT after failing on a leaking brake pipe and seized n/s rear caliper. fitted new pipe and managed to free off caliper enough to pass but had to buy a new one as it stuck again on way back from test. It's also got a nice new shiny windscreen and i wired up the stereo, so all that's left to do is to fit and paint the caliper then get it taxed next month and it is back on the road after about 7 months off :smiley:
That's brilliant well done, bet you can't wait to get it back on the road.
-
:smiley:Well it's finally finished I put the new caliper on and changed the gearbox oil yesterday. Now just waiting until the first of the month to tax it. Then I can get the front bumper on the TT fixed.
-
Nice one mate well done!! Just for my reference what kind of gearbox oil do you use and do you just fill it until it starts coming out the hole. Lost a bit of mine when removing it!!
-
Not sure what oil it was as it was what they use in the garage, I did add some Forte gear oil treatment to it and the gears are so smooth now. I just filled it until it reached the top.
-
Nice one cheers and again excellent work on the Golf!!
-
cheers mate can't wait to see yours finished, keep at it!
-
here you go dirt cheap i just cut it about an inch too big all around and the heated it up with a hair dryer and stretched it to shape.
http://www.ebay.co.uk/itm/Gold-Yellow-Tail-Fog-Head-Light-Tint-Vinyl-Film-Cover-/180860375090?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2a1c1e5032
How long did it take for you to get your tint? As I saw this post and I ode red some on the 11th of April and it still ain't got here yet
-
How long did it take for you to get your tint? As I saw this post and I ode red some on the 11th of April and it still ain't got here yet
Well its coming from hong kong and does say 12 - 24 working days. Jeez I better go buy mine so I get it for the end of next month lol.
-
Lazylunatic does it too,
that's where I got mine from :smiley:
-
here you go dirt cheap i just cut it about an inch too big all around and the heated it up with a hair dryer and stretched it to shape.
http://www.ebay.co.uk/itm/Gold-Yellow-Tail-Fog-Head-Light-Tint-Vinyl-Film-Cover-/180860375090?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2a1c1e5032
How long did it take for you to get your tint? As I saw this post and I ode red some on the 11th of April and it still ain't got here yet
i think it took 2weeks
-
here you go dirt cheap i just cut it about an inch too big all around and the heated it up with a hair dryer and stretched it to shape.
http://www.ebay.co.uk/itm/Gold-Yellow-Tail-Fog-Head-Light-Tint-Vinyl-Film-Cover-/180860375090?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2a1c1e5032
How long did it take for you to get your tint? As I saw this post and I ode red some on the 11th of April and it still ain't got here yet
Got it today cheers :afro: just about to pic some pics up in my build thread
i think it took 2weeks
-
Ha ha, I ordered that stuff too on the 22nd. Not arrived yet though! :rolleyes: I got the yellow, and I got some light smoke too. :smiley:
-
well after all that rushing about getting the Golf MOT'd and taxed ready for Stanford Hall show it's been postponed until july 1st! :rolleyes:
-
glad i taxed the car yesterday as someone robbed the local post office this morning. gave it a good clean inside and out then went on a little drive and all feels good :smiley:
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONHOME204.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONHOME203.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONHOME198.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONHOME197.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONHOME185.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONHOME234.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONHOME228.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONHOME226.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONHOME225.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONHOME218.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONHOME217.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONHOME216.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONHOME213.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONHOME212.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONHOME207.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDONHOME206.jpg)
-
Managed to get the summer wheels on the TT and all 3 cars polished :smiley:
(http://i171.photobucket.com/albums/u297/L13BUG/GORDANBART031.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/GORDANBART036.jpg)
-
Managed to find another BBS wheel for a tenner so gave it a refurb over the weekend
(http://i171.photobucket.com/albums/u297/L13BUG/KGrHqVlkE-dBvrlpBPpTMo60_12.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/BBSWHEEL007.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/BBSWHEEL006.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/BBSWHEEL005.jpg)
-
Managed 5th place at Stanford Hall show yesterday which was not too bad considering some of the cars i was up against.
(http://i171.photobucket.com/albums/u297/L13BUG/STANFORDHALL2012087-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/STANFORDHALL2012156.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/STANFORDHALL2012154-1.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/STANFORDHALL2012151-1.jpg)
-
Looking good, congratulations on 5th
-
Sweet interior mate :cool:
-
So clean, very jealous!
-
such a good job, this motor is mint! only thing i dont like is the back box, seems really intrusive.
had to laugh at the pigeon and badger fiasco too haha
-
(http://i171.photobucket.com/albums/u297/L13BUG/DSC_0553.jpg)
-
(http://i171.photobucket.com/albums/u297/L13BUG/DSC_0540.jpg)
-
Got fed up of cleaning the BBS wheels so refurbished some 16v wheels
(http://i171.photobucket.com/albums/u297/L13BUG/DSC_0357.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/DSC_0352.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/DSC_0353.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/DSC_0360.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/DSC_0362.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/DSC_0429.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/DSC_0539.jpg)
-
Also I have sold the TT and bought a Passat 3.2V6 4motion
(http://i171.photobucket.com/albums/u297/L13BUG/DSC_0013.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/DSC_0017.jpg)
(http://i171.photobucket.com/albums/u297/L13BUG/stanfordhall2013080.jpg)