GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: Gears on 22 February 2011, 21:29

Title: Head Gasket replacement
Post by: Gears on 22 February 2011, 21:29

Hey as i said in another post my head gasket has gone so after payday me and my pal are going to replace it (with help from a Haynes manual) i was just wondering if anyone knew what tools were needed for the job and if there is any things i should be careful or look out for while carrying out my baby's lifesaving procedure.
1.4 8v on an M plate,is that 1996?

Title: Re: Head Gasket replacement
Post by: Wayne on 22 February 2011, 21:33

M plate is 1994/95, you shold replace the head bolts as well also worth getting the head checked whilst it is off as it may need a light skim.

Title: Re: Head Gasket replacement
Post by: harlemex on 23 February 2011, 12:57

It may be your head that is knackered.

Title: Re: Head Gasket replacement
Post by: harlemex on 23 February 2011, 13:00

A new cambelt and tensioner, some gasket sealer for your rocker cover (or new gasket). check camshaft oil seal and replace if needed.  :cool:

Title: Re: Head Gasket replacement
Post by: Len on 23 February 2011, 13:02

What caused the headgasket to blow? Major overheating?
If so yes the head will probably need skimming!
So allow a week in between taking it off and refitting.