GolfGTIforum.co.uk

Model specific boards => Golf mk6 => Topic started by: quinnii on 22 February 2011, 16:42

Title: RNS 510 and Bluetooth
Post by: quinnii on 22 February 2011, 16:42

Im having problems with good old VCDS again!  :undecided:

Iv installed both the latest VW bluetooth kit and the RNS 510 and went through all the coding required on VCDS.

It even gets to the point where you click "Do It!" and it says coding accepted but as soon as i come out of VCDS and see if anythings changed on the car... nothing!

Im at a loss!

Am i missing something?

Title: Re: RNS 510 and Bluetooth
Post by: jamojdm on 22 February 2011, 18:45

did you reboot the RNS510? (hold setup and press < > buttons)

Title: Re: RNS 510 and Bluetooth
Post by: quinnii on 22 February 2011, 19:27

Yer iv tried resetting it. The phone menu isnt showing up in the MFD so theres a problem somewhere! This is a complete retrofit as in i didnt have a bluetooth module at all before installing this one.

Title: Re: RNS 510 and Bluetooth
Post by: quinnii on 22 February 2011, 22:13

Sorted!  :rolleyes:

Title: Re: RNS 510 and Bluetooth
Post by: branchespark on 22 February 2011, 23:14

Go on - tell us why! (Other people may fall in to your bear trap.)

Title: Re: RNS 510 and Bluetooth
Post by: quinnii on 23 February 2011, 15:34

I was trying to activate the telephone-77 and nav through the CAN bus long coding. For some reason i coudnt do this so i had to activate them through the CAN installation list which is another option in that menu.

Hope that makes sense