GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Wazzzer on 05 February 2011, 14:53

Title: denied...
Post by: Wazzzer on 05 February 2011, 14:53

Pre det ahoy! :sad:

DIY tuning at its best lol

Title: Re: denied...
Post by: bricey on 05 February 2011, 16:33

uh?
not have a good day then mate

Title: Re: denied...
Post by: Wazzzer on 05 February 2011, 18:27

Not the best mate, she's running waaaay too much boost and consequently the run was aborted  :sad:

Full credit to Jim from JKM though, explained the problem and gave me my £35 back :afro:

Been told I need to go up to R-Tech for a tweak ASAP now

It made 168bhp@3300rpm  :shocked:

Title: Re: denied...
Post by: richw911 on 05 February 2011, 18:42

Quote from: Wazzzer on 05 February 2011, 18:27

Not the best mate, she's running waaaay too much boost and consequently the run was aborted  :sad:

Full credit to Jim from JKM though, explained the problem and gave me my £35 back :afro:

Been told I need to go up to R-Tech for a tweak ASAP now

It made 168bhp@3300rpm  :shocked:

 :shocked: :shocked: Fook!

Title: Re: denied...
Post by: RTechUK on 05 February 2011, 18:48

Needs mapping down for the forge actuator.. :wink:  What was the torque?

Nick

Title: Re: denied...
Post by: Wazzzer on 05 February 2011, 19:17

Yeah I was shocked too Rich

Nick - 260lb/ft @ 3300 :shocked:

AFR hit 14.5 too  :shocked: :shocked: :shocked:

I think I'm a prime example of the reasoning behind your decision to custom map the AGU/K03s combo  :grin:

Title: Re: denied...
Post by: Wayne on 05 February 2011, 20:42

Will be awesome power when sorted.

Title: Re: denied...
Post by: Dave_IOW on 05 February 2011, 20:45

When you goin up to R-Tech the Wes, shame that your RR day didnt go to plan :sad: good you got ya money back though  :afro:

Title: Re: denied...
Post by: Wazzzer on 05 February 2011, 21:25

Will hopefully go up on the same day as Inters if Nick can fit me in for the morning, all depends on how long it will take to iron out all the bugs

Wayne - cheers mate I hope so :smiley:

Title: Re: denied...
Post by: jamie16v on 06 February 2011, 11:30

Quote from: Wazzzer on 05 February 2011, 19:17

I think I'm a prime example of the reasoning behind your decision to custom map the AGU/K03s combo  :grin:

are you also running a r-tech k03 map on a ko3s then wes?..

Title: Re: denied...
Post by: Wazzzer on 06 February 2011, 13:45

no I am running a K03s map but tweaked for my previous actuator, not this one

Title: Re: denied...
Post by: tech1889 on 06 February 2011, 15:11

Unlucky mate hope its all sorted soon..

Title: Re: denied...
Post by: Wazzzer on 06 February 2011, 18:12

already on it mate  :wink:

Done some logs and knocked some preload off the actuator to make it a bit safer, will get my backside up to R-Tech and get the mapped tweaked soon

Title: Re: denied...
Post by: tech1889 on 06 February 2011, 18:17

yer if its that bad needs to be sorted asap.. i thought they tweaked it last time for actuator ??

Title: Re: denied...
Post by: Wazzzer on 06 February 2011, 20:39

yeah for the knackered one so I at least had some boost, now I've got the Forge one on it needs to be sorted for good  :smiley:

Title: Re: denied...
Post by: RTechUK on 07 February 2011, 14:28

Last time you popped down we adjusted the N75 mapping to compensate for the actuator being bent and dodge pot,  now your running a stronger linear setup with the forge the ecu n75 is not reacting ealry enough to stop the spike.

Look forward to meeting you again soon  :wink:

Nick