GolfGTIforum.co.uk

General => The garage => Topic started by: Andy-H on 28 December 2010, 15:31

Title: 16v cam timing
Post by: Andy-H on 28 December 2010, 15:31

Afternoon folks  :smiley:

I'm wanting to replace the inlet cam on the C tomorrow but not too sure about the timing marks  :undecided:

Are these the same as the Mk2 positions??

I'm putting a KR inlet into the 9a head.

Also any diagrams would be much apreciated :afro:

Cheers in advance,

Andy

Title: Re: 16v cam timing
Post by: Wayne on 28 December 2010, 23:37

From memory, the 2 cam gears have dots and they line facing each other, then the dot on the cam pulley lines up with the edge of the head.

Title: Re: 16v cam timing
Post by: danny_p on 29 December 2010, 01:32

mark on cam pully lines up with the arrow on cam cover.

Title: Re: 16v cam timing
Post by: Andy-H on 29 December 2010, 07:44

Cheers fella's :afro:

I'll get it sorted today then  :evil: