GolfGTIforum.co.uk

Model specific boards => Golf mk6 => Topic started by: N13KKF on 27 December 2010, 11:40

Title: Coding Rns 510 GOLF MKVI
Post by: N13KKF on 27 December 2010, 11:40

Ive just installed a RNS 510 into a Golf MKVI and tried coding it, im sure all i have to do is enable BAP so the MFD will work.

i found that the MFD only Displayed AUDIO and NO Navigation but all the MFSW buttons work

have i missed something out?

Cheers

Nick

Title: Re: Coding Rns 510 GOLF MKVI
Post by: p3asa on 27 December 2010, 11:48

Have a look at this link
http://www.golfgtiforum.co.uk/index.php?topic=152441.0

Title: Re: Coding Rns 510 GOLF MKVI
Post by: The Doc on 27 December 2010, 12:08

You need to go into can gateway and tick navigation in the Long coding coding  :wink:

Ill check which one it is when I get home.

Title: Re: Coding Rns 510 GOLF MKVI
Post by: mortygt140 on 27 December 2010, 13:01

Its 19 CAN Gateway installation list then tick box 37 Navigation and save.

Darren

Title: Re: Coding Rns 510 GOLF MKVI
Post by: KIX on 31 January 2011, 21:29

Also cicle  the keys and reset the RNS, then it will comunicate with the MFD.
press the  < > buttons and the  rightmost button on the DVD slot.  till it shuts down and  restart...

Viola!!!  NAv on the  MDF