GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: the_stink on 15 December 2010, 19:41

Title: bumper sagg
Post by: the_stink on 15 December 2010, 19:41
weh you look front on a the car the grill at the passengerside is lined up with the grill but as you follow it along to the driverside it drops down prob about and inch or just under, now is this due the the bits of plastic on the wings that hold the bumper?

Just another little thing ive been meanign to sort out :P
Title: Re: bumper sagg
Post by: The Mighty Elvi on 15 December 2010, 20:17
Think of womens breasts as they get older. Same problem.
Title: Re: bumper sagg
Post by: X4MGS on 15 December 2010, 20:32
Quote from: The Mighty Elvi on 15 December 2010, 20:17
Think of womens breasts as they get older. Same problem.

 :laugh: :laugh: :laugh:

But how do get a Hold Up Bra for MK2 Bmpers?

Gaffa Tape? :tongue:
Title: Re: bumper sagg
Post by: Mr Blue on 15 December 2010, 22:44
Ive found this with a few big bumper 2's. Are the bumpers genuine?

Common for the bumper brackets to snap.

If the bumper bracketss and wing clips are all in good condition then its a case of adjusting the slam pannel and bumper iron.

Ive had spacers and other bits fabbed up just to get mine to sit right

Can take a while to adjust. I find this the worst alignment task.
Title: Re: bumper sagg
Post by: Ben Lessani on 15 December 2010, 22:59
Spacers fitted under the bumper irons inside the chassis legs ;)
Title: Re: bumper sagg
Post by: the_stink on 16 December 2010, 11:27
Quote from: Ben Lessani on 15 December 2010, 22:59
Spacers fitted under the bumper irons inside the chassis legs ;)

The Bumper was a brand new one (big boys toys maybe?) but when i met up with Horney and we fitted it I think he did mention it about spacers will look into this
Title: Re: bumper sagg
Post by: cняis on 16 December 2010, 20:46
Quote from: the_stink on 16 December 2010, 11:27
Quote from: Ben Lessani on 15 December 2010, 22:59
Spacers fitted under the bumper irons inside the chassis legs ;)

The Bumper was a brand new one (big boys toys maybe?) but when i met up with Horney and we fitted it I think he did mention it about spacers will look into this

a bit pikey i know but groups of washers will work as spacers.

replacement wing brackets can be a PIG to fit  :angry:
Title: Re: bumper sagg
Post by: dadrathers on 16 December 2010, 21:41
Quote from: Ben Lessani on 15 December 2010, 22:59
Spacers fitted under the bumper irons inside the chassis legs ;)

I have a wonkey bumper but how do you insert the washers when the chassis leg is inaccessible as soon as you slide the bumper irons in????
Title: Re: bumper sagg
Post by: Ben Lessani on 16 December 2010, 21:48
There is enough access - at least on big bumpers, through the indicator hole IIRC

I somehow managed to take this photo - so there is plenty of room.

(http://i136.photobucket.com/albums/q171/blessani/mini-CIMG7676.jpg)
Title: Re: bumper sagg
Post by: The Mighty Elvi on 16 December 2010, 22:26
OOhhh!!!!!

BBC should do a documentary on the inner workings of the Golf.


Title: Re: bumper sagg
Post by: SoundillusioN on 17 December 2010, 00:12
Quote from: The Mighty Elvi on 16 December 2010, 22:26
OOhhh!!!!!

BBC should do a documentary on the inner workings of the Golf.




I'd watch it.  :grin: