GolfGTIforum.co.uk

General => The garage => Topic started by: rossbarry1 on 09 December 2010, 11:55

Title: DIY quickshift
Post by: rossbarry1 on 09 December 2010, 11:55

Is this possible and if so does anyone have the dimensions etc?

Thanks

Title: Re: DIY quickshift
Post by: N900 MJT on 09 December 2010, 18:17

What car mate?

Title: Re: DIY quickshift
Post by: tech1889 on 09 December 2010, 23:14

yer car and what engine would help.. but im still going to say no..

Title: Re: DIY quickshift
Post by: Ben Lessani on 12 December 2010, 23:36

MK2 8v GTi

Easiest and cheapest method is to drill another hole in the gearbox linkage, about 1" lower than the standard hole.

(http://i136.photobucket.com/albums/q171/blessani/mini-CIMG7631.jpg)

Title: Re: DIY quickshift
Post by: rubjonny on 13 December 2010, 14:56

another option is to make a plate with 2 holes in and bolt it to the end of the relay shaft lever, then no need to modify anything.

http://www.4crawler.com/Diesel/ForSale/ShiftLinkage.shtml

some nice stuff on there, poly relay shaft ball and bushes are a nice upgrade, the ball kits are good as well.