GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: mowlamb on 08 December 2010, 21:37

Title: Part Number Required pleeeeeaaaaaaaaaasssssssseeeeeeeee
Post by: mowlamb on 08 December 2010, 21:37

I need the part number for the plastic T shaped bonnet release catch. It's the piece you pull to open your bonnet once you've popped it open slightly from inside the car.

Title: Re: Part Number Required pleeeeeaaaaaaaaaasssssssseeeeeeeee
Post by: tech1889 on 08 December 2010, 21:38

cant you get one off someone breaking a mk4 ??

Title: Re: Part Number Required pleeeeeaaaaaaaaaasssssssseeeeeeeee
Post by: mowlamb on 08 December 2010, 21:43

I have Purely Vag who is breaking a 1.8T so hopefully he can sort me out  :wink:

Title: Re: Part Number Required pleeeeeaaaaaaaaaasssssssseeeeeeeee
Post by: tech1889 on 08 December 2010, 21:45

no need for part number then as they all the same lol ??

Title: Re: Part Number Required pleeeeeaaaaaaaaaasssssssseeeeeeeee
Post by: mowlamb on 08 December 2010, 21:50

Your right, I'm not quite sure why I started the thread lol.

THere are plenty of mk4 breaking at the mo and Purely Vag always get plenty so is bound to have one sooner or later  :rolleyes:

Title: Re: Part Number Required pleeeeeaaaaaaaaaasssssssseeeeeeeee
Post by: tech1889 on 08 December 2010, 21:51

yer im surprised he hasn'ty got one at the mo he only got a mk4 in 2 days ago..

Title: Re: Part Number Required pleeeeeaaaaaaaaaasssssssseeeeeeeee
Post by: mowlamb on 08 December 2010, 21:52

He might have it, he just ain't replied yet :embarassed:

Title: Re: Part Number Required pleeeeeaaaaaaaaaasssssssseeeeeeeee
Post by: topher on 09 December 2010, 14:27

Quote from: Mak_Waige on 09 December 2010, 14:21

can anyone get me a part number for a complete opel phase 2 grill for a mk3 astra please & the badge?  i can get a picture if needed

err.. i think you're confused, opel = vauxhall = natural enemy to VW :grin:

to the OP, part number for the bonnet release rod is 1J0 823 593 C. Should be less than a fiver.

Title: Re: Part Number Required pleeeeeaaaaaaaaaasssssssseeeeeeeee
Post by: rio_gti on 09 December 2010, 14:33

im sure i got a reciept for one and it was 30 ish quid!!!

Title: Re: Part Number Required pleeeeeaaaaaaaaaasssssssseeeeeeeee
Post by: topher on 09 December 2010, 14:34

the whole bonnet catch is about 30 quid, the plastic release rod is available separately

Title: Re: Part Number Required pleeeeeaaaaaaaaaasssssssseeeeeeeee
Post by: rio_gti on 09 December 2010, 14:37

a haaaaa, thought it were a bit expensive for just a bit of plastic!!!