GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Rico_GTi on 05 December 2010, 21:09

Title: AGU Ko3s hose questions
Post by: Rico_GTi on 05 December 2010, 21:09

Hey guys n girls,
                     
                      Managed to pick myself up a ko3s (k03-052) off an 04 leon cupra R with 15k on it  :smiley: looking to do the conversion early next year but have a couple of q's about the hoses I need.

1. The turbo came without the metal intake pipe on the side, I plan on getting silicone hoses both sides of the turbo but do I need this aswell as I know the agu pipe is different, or does the silicone hose cut this out?

2. Forge hoses; will the intake pipe for an agu fit over the inlet of an auq turbo? Want to try and avoid getting the aum/auq one and havin to blank the extra outlet.

Last but not least on the outlet side, I know I need the auq turbo hoses with the larger elbow pipe, but will the other hoses on the kit fit ok to an agu?

Hoping someone that's already been down this route may know.

Thanks in advance for any help or pointers.
Rich

Title: Re: AGU Ko3s hose questions
Post by: Wazzzer on 05 December 2010, 21:20

If you can get the 90deg pipe that goes on the turbo outlet from the Leon. The silicone intakw pipe will remove the need for the metal pipe. AGU pipes will all fit  :smiley: