GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: shikta000 on 22 November 2010, 13:48
-
hey guys and gals ... do these do the job well ?
-
You need to post the link on here for us to help you mate :grin:
-
oh tis ok now ... just read rj's ' how to ' in maintenance section, gsf sell them. ... another query, does anyone sell the gearshift alignment tool on here?
-
go into the vw parts section on ebay and search for 'tool' usually some on there
-
Or use a casette tape. Although I suspect those are getting rare these days as well. Does an iPod work? :grin:
Nick
-
go into the vw parts section on ebay and search for 'tool' usually some on there
I did that on google images once "Tool" never again :lipsrsealed: :grin:
-
cd case does the job as well
-
thanks guys ... think i'll go for the ' proper tool ' , just wondering how a cassette tape was found to do the job, whose mind did that escape from?
-
wasnt me, something i read of cgti a few years back!
-
hi there,
best gear linkage kit to get off ebay is from tierod69, this is B&B Components ebay user name.
they really know their stuff and are very helpfull.
got loads of bits and pieces from them over the last couple of years.
if you are replacing the linkage, make sure you replace all the bits under the gear stick, i cheated the first time and did the bits i could get to in the engine bay, which worked for a couple of months, but ended up doing the whole lot when i was replacing the exhaust, and now th egear change is as good as new, with no slop in the gear stick, which is nice :grin:
-
hi there,
best gear linkage kit to get off ebay is from tierod69, this is B&B Components ebay user name.
they really know their stuff and are very helpfull.
got loads of bits and pieces from them over the last couple of years.
if you are replacing the linkage, make sure you replace all the bits under the gear stick, i cheated the first time and did the bits i could get to in the engine bay, which worked for a couple of months, but ended up doing the whole lot when i was replacing the exhaust, and now th egear change is as good as new, with no slop in the gear stick, which is nice :grin:
I can vouch for B&B on the bay.. I have bought quite a bit for my car from them and were very happy.... Oh and yes, get the full kit including new rods and do the whole lot, wll worth it, like a new geabox afterwards!... no "proper" tools are required!.. just a methodical approach and some patience!
-
sounds like good advice bb components it is ... cheers guys