GolfGTIforum.co.uk

General => The garage => Topic started by: harr1s on 03 June 2003, 23:01

Title: audi 2.2 throttle body..
Post by: harr1s on 03 June 2003, 23:01

   hello there chaps, Im sure that ive seen it about on the forum somewhere? about the audi  2.2 throttle body fitting on a mk2 as a direct replacment also something about the warm up valve/ regulator.  has anyone carried out this mod or know anymore about it and what difference to performance would it make or would it cause any long term problems. also which audi model is it exactly..

   please help ....

            cheers.......
                              Harr1s.

Title: Re: audi 2.2 throttle body..
Post by: old_boy on 03 June 2003, 23:31

I did it on an old mk1 gti, you can use any bigger throttle body, but i was told to use the matching warn up reg from the same donor engine.
The inlet manifold has to be opened up so the ports match.
A vacuum hose needs to be connected to the warm up reg so the fuel is enriched on full bore.
Drill your air box and get a K&N-you will really notice the difference! ;)
Any further help needed-get in touch

Title: Re: audi 2.2 throttle body..
Post by: richandhazel on 05 June 2003, 14:47

This may help you, courtesy of alanbe from CLUBGTI:-

http://homepage.ntlworld.com/richandhazel1/Al's_Golf_Mods/Throttle_body.htm

http://homepage.ntlworld.com/richandhazel1/Al's_Golf_Mods/Audi_warm_up_regulator.htm

Title: Re: audi 2.2 throttle body..
Post by: tattoomang60 on 19 May 2011, 12:02

i done it on one of my mk1s and it realy dose make a diff. :laugh:

Title: Re: audi 2.2 throttle body..
Post by: rossbarry1 on 19 May 2011, 21:49

i thought the mk2 TB were the same size and it makes no diffrence