GolfGTIforum.co.uk
General => Cosmetic and bodywork matters => Topic started by: 1stevester1 on 30 October 2010, 22:19
-
need help on parts for spraying !!!
-
can nobody help just wanted some advice :cry:
-
What are you looking for ?? A guide on how to spray the parts or which parts to spray ??
-
both realyy just a idiots guide would be great
-
Interior parts that could be removed and sprayed include heater control knobs, the plastic surround trim around the heater controls, interior door handles, grab handles and the pillar trim.
To spray them....remove from the car, then spray with etching primer, spray with the desired colour with a few coats then lacquer for a nice shiny finish, Then refit to the car and job done :wink:
-
absoulote legend but how do i get these parts off looking doo most of them except the heater controls in silver
-
also what grade paper would i use got loads i need advice in this sprayering buisness and re doing my wheels hard work !!
-
Any plastic parts should be washed in hot soapy water, and keyed with grey Scotchbrite (Halfords} till they have a lightly scuffed appearance, then washed thoroughly, dried with a hair dryer, de-greased, them primed with a suitable plastic primer left for 10/15mins then lightly painted one coat at a time....
Thom