GolfGTIforum.co.uk
General => The garage => Topic started by: kevjenkins on 29 October 2010, 09:48
-
I have just got my vag com lead and software disc offa ebay and it has loaded fine i have gone into setting to change the port and it still dont reconise the cable any ideas please
??????
-
go into device manager and check the virtual com port number. if its higher than 4 you'll have to go into the properties and change it for a lower number, and if the lower numbers are taken you'll have to change one of the other ports to a higher number first to clear it, then change the vagcom cable to the lower number. does that make any sence at all?
-
Now i got it to reconise the cable (com 3) it will not reconise the fookin car when conected???
-
what car is it? the ones floating around ebay at the moment often struggle with pre 2001 cars
-
W REG 2000 V6 4 motion!
-
If this is the case where do i get the one that will work ????????
-
ross tech... :wink:
-
i take it you have the ingition switched on when you're trying it, and the led on the port lights up when plugged in?
-
you prob got the tenner one, you need it with the interface built in, mate had same prob
-
SSSSSSSSSOOOOOOOOOOOO
how much do i spend??????
they range from 10 to 249????? on ebay
-
I got one for a tenner off ebay and it works fine on my 92 gti, try using port com 1 as that's the only one which works with my car (you will need to change it on device manager).