GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: thebassman on 17 September 2010, 10:28
-
Hi guys
I have some dreaded rust appearing on the front drivers side. I need to remove the plastic wheel arch trim to get access. I can see a few rivets, i guess these are metal rivets so need drilling out/
Anyone know what size they are and any other trim clips etc. that i might need to buy for when i put it all together.
If anyone has an exploded diagram of a 1995 8V, that would be cool.
cheers
-
You have to drill out the rivets under the arch.
I would suggest self tappers to refix.
-
N 90634901 - pop-rivet A4X14
few pence each :smiley:
-
You have to drill out the rivets under the arch.
I would suggest self tappers to refix.
+1 worked all ok for me.
-
N 90634901 - pop-rivet A4X14
few pence each :smiley:
Is that a Vw part number?
-
N 90634901 - pop-rivet A4X14
few pence each :smiley:
Is that a Vw part number?
Yep :smiley: only difference is they are black standard rivets will do the same job.
-
found some on ebay too: http://cgi.ebay.co.uk/4-0-x-14mm-Black-Alum-Steel-Shaft-Pop-Rivets-50pk-/260515081038
more than enough to do the job
-
Thanks for all your replies guys.