GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: moonsta on 22 January 2005, 07:39

Title: Twin 40's.....
Post by: moonsta on 22 January 2005, 07:39

 :embarassed: sorry to sound stupid,but if i fit twin 40's on my gti and remove the old injectors,what do i put in the holes that are left to fill em up?? have never seen a car up close that's converted so not had a chance to look,thanks and no i'm not blonde!!!!  :laugh:

Title: Re: Twin 40's.....
Post by: mk1 on 22 January 2005, 10:11

On the later injected cars the injectors are in the manifold, so when you change to 40's the manifold you have to use has no holes.
Steve.

Title: Re: Twin 40's.....
Post by: moonsta on 22 January 2005, 10:22

 :smiley: i'm actually thinking of doing it to a 1990 audi 2.0 which is going in my jetta,so will check it out.thanks :grin:

Title: Re: Twin 40's.....
Post by: maximous on 23 January 2005, 15:21

if your doing it to a 2.0l then i would go with 45s for the fueling

Title: Re: Twin 40's.....
Post by: moonsta on 23 January 2005, 15:48

 :smiley: thanks for that,i haven't sourced any carbs as of yet bt will bear that it mind.I have found that Demon Tweeks do the manifold for ?113:00 and the throttle cable too.I should be able to pick up a good pair of 40's for about ?200.........ta :smiley: