GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: hockeylad72 on 20 January 2005, 22:17

Title: vacuum hose
Post by: hockeylad72 on 20 January 2005, 22:17

help required again!!!
vacuum hose from back of instrument cluster where does it go to ( the hose is for the mfa)
went to my local VW dealer today they could not tell me
hope someone can help me on this one
cheers

Title: Re: vacuum hose
Post by: Dizzie on 20 January 2005, 22:41

inlet manifold  :cool:

Title: Re: vacuum hose
Post by: hockeylad72 on 20 January 2005, 22:44

where about, was previously told inlet manifold. i have looked and cannot see where it would attach.

Title: Re: vacuum hose
Post by: Dizzie on 21 January 2005, 12:41

if it's a k-jet 8v then I think it was on a bunch of tubes coming off the end and going between the manifold and the scuttle panel. It comes out of the scuttle as a clear plastic tube and goes into a piece of rubber before joining the manifold.

Title: Re: vacuum hose
Post by: davidhawkins_78 on 21 January 2005, 13:37

On a Digi GTi it's pretty much the same - look at the tubing coming off the inlet underneath the coil area - should be a 'T' piece it connects to ...

Title: Re: vacuum hose
Post by: hockeylad72 on 22 January 2005, 10:38

cheers guys, managed to find it. Previous owner blocked it off
sorted!!